Green-Fuel Production Through Co-Processing Biomass Derived Oil with Standard Gasoil Feedstock

Rizki Ekananda, Rokhmaturrokhman Rokhmaturrokhman, Wilda Yuni Parinduri, Zaky Al Fatony

Abstract

To enhance refinery revenue through the use of new and renewable materials, lab-scale research on green-fuel production has been conducted. This involved co-processing biomass-derived oil with standard gasoil feedstock and existing E-cat to assess its feasibility for commercial fluidized catalytic cracking (FCC) units. The catalytic cracking process varied the type of biomass-derived oil (Crude Palm Oil (CPO) and Refined Bleached Deodorized Palm Oil (RBDPO)) against standard gasoil, using typical operating parameters: cracking temperature of 510 °C, C/O ratio of ~6, and regenerator temperature of 715 °C. The Advanced Cracking Evaluation (ACE) reactor modeled one cycle of reaction and regeneration. Product yields were calculated using mass balance of liquid and gas products, modeled with GC Simdist, GC RGA, and CO2 Analyzer, while gasoline octane number was based on PONA composition using GC DHA. Results showed conversion rates of 85-86%, Research Octane Number (RON) of 91.2 – 93.55, and product yields for coke, dry gas, propylene, LPG, gasoline, LCO, and bottom fraction in the ranges of 6.9 – 7.1%, 1.26 – 3%, 6.79 – 8.5%, 19.52 – 23.1%, 44.8 – 51.63%, 10.21 – 11.4%, and 3 – 3.68%, respectively. Both CPO and RBDPO can be used as co-processing feedstock in FCC units, but adjustments in operating conditions, catalyst formulation, or optimization of the wet gas compressor may be needed due to higher light fraction (Propylene and LPG) and lower gasoline production.

Keywords

green fuel; co-processing; fluidized catalytic cracking (FCC)

Full Text:

PDF

References

Adiatma, J.C., and Prasojo, H., 2021. Critical review on the biofuel development policy in Indonesia. Institute for Essential Service Reform, Jakarta.

Afife, M.R., Mortazavi, Y., Aghakhani, M.S., and Najafi, S., 2012. Comparison of Catalytic Properties and Cracking Activities of FCC Catalysts Bound with Different Colloidal Binders: Silica, Alumina and Silica-Alumina, Proceedings of the 14th Iranian National Chemical Engineering Congress. IchEC, 16-18 October 2012, Sharif University of Technology, Tehran, Iran.

Azis, Z., Susanto, B.H., and Nasikin, M., 2020. Gasoline Yield Enhancement in Fluid Catalytic Cracking by Coprocessing of Petroleum Gasoil with Refined Bleached Deodorized Palm Oil and Palm Fatty Acid Distillate. Journal of Computational and Theoretical Nanoscience, 17. https://doi.org/10.1166/jctn.2020.8770.

BOD Performance Dialogue, 2020. Pertamina Towards National Energy Champion, Pertamina Strategic Investment. Jakarta.

Dyk, S.V., Su, J., McMillan, J.D., Saddler, J.N., 2019. Drop-in Biofuel: The Key Role that Co-processing will Play in its Production. IEA Bioenergy, Canada.

Hidayat A., 2022, Prospect of Palm-Based Biodiesel and Its Downstream Products, Conference of the 3rd Palm Biodiesel: The Road to G20, Presentation Slides, 24 March 2022, APROBI-CPOPC. Yogyakarta, Indonesia.

Japir, A.A.-W., Salimon, J., Derawi, D., Bahadi, M., Al-Shuja’a, S., and Yusop, M.R., 2017. Physicochemical Characteristics of High Free Fatty Acid Crude Palm Oil. OCL, 24, 1–9. https://doi.org/10.1051/ocl/2017033.

Juarsa, Syarif, A., and Kalsum, L., 2021. Effect of Feed Composition and Product Quantity of Co-Processing Refined Bleached Deodorized Palm Oil (RBDPO), Proceedings of the 4th Forum in Research, Science, and Technology. (FIRST-T1-T2-2020). Atlantis Highlights in Engineering, pp. 35–40.

Kayser J.C., 2000. Versatile Fluidized Bed Reactor. Google Patent: US6069012A. Kayser Technology Inc., United States.

Liu, Z., Zhang, Z., Liu, P., Zhai, J., and Yang, C., 2015. Iron Contamination Mechanism and Reaction Performance Research on FCC Catalyst. Journal of Nanotechnology, 1–6. https://doi.org/10.1155/2015/273859.

Mansur, D., Aminuddin, A., and Wargadalam, V.J., 2020. Production of Bio-Hydrocarbon from Refined-Bleach-Deodorized Palm Oil Using Micro Activity Test Reactor. Reaktor, 20, 75–80. https://doi.org/10.14710/reaktor.20.2.75-80.

Rupilius, W., and Ahmad, S., 2007. Palm Oil and Palm Kernel Oil as Raw Materials for Basic Oleochemicals and Biodiesel. European Journal of Lipid Science and Technology, 109, 433–439. https://doi.org/10.1002/ejlt.200600291.

Sadeghbeigi, R., 2000. Fluid Catalytic Cracking Handbook, second. ed. Gulf Professional Publishing, Houston. https://doi.org/10.1016/b978-0-88415-289-7.x5000-8.

Stratiev, D., Shishkova, I., Ivanov, M., Dinkov, R., Georgiev, B., Argirov, G., Atanassova, V., Vassilev, P., Atanassov, K., Yordanov, D., Popov, A., Padovani, A., Hartmann, U., Brandt, S., Nenov, S., Sotirov, S., and Sotirova, E., 2021. Role of Catalyst in Optimizing Fluid Catalytic Cracking Performance during Cracking of H-Oil-Derived Gas Oils. ACS Omega, 6, 7626–7637. https://doi.org/10.1021/acsomega.0c06207.

Refbacks

  • There are currently no refbacks.