RAYLEIGH RELIABILITY FOR 1 STRENGTH- 4 STRESSES

Ahmed Haroon Khaleel

Abstract

When a reliability function is found for a particular model, attention should be paid to the factors affecting this model, which often divide these factors into the durability factors possessed by the components of the model and the stress factors to which the components of the model are exposed. In this paper, a reliability function was found for one of the stress-robustness models where the model consists of one component that has robustness expressed by the random variable X  and is subjected to four stresses expressed by random variables (Y1, Y2, Y3, Y4)   assume that the random variables follow the Rayleigh distribution. The distribution parameters were estimated by three methods of estimation (maximum likelihood method, least squares method and weighted least squares method), after which the reliability function of the model was estimated. A Monte Carlo simulation was also performed to compare the results obtained from the estimate using the mean squared error criterion. The comparison showed that ML is the best estimator of the reliability function.

Keywords

Component, Maximum likelihood, Rayleigh distribution, Reliability, Simulation.

Full Text:

PDF

References

Alshanbari, H. M., Gemeay, A. M., Hosni El-Bagoury, A. A. A., Khosa, S. K., Hafez, E. H., & Muse, A. H. (2022). A novel extension of Fréchet distribution: Application on real data and simulation. Alexandria Engineering Journal, 61(10), 7917–7938. Retrieved from https://doi.org/10.1016/j.aej.2022.01.013

Haddad, E. S. M., & Batah, F. S. M. (2021). On Estimating Reliability of a Stress – Strength Model in Case of Rayleigh Pareto Distribution. Iraqi Journal of Science, 62(12), 4847–4858. Retrieved from https://doi.org/10.24996/ijs.2021.62.12.23

Hamad, A. M., & Salman, B. B. (2021). On estimation of the stress-strength reliability on POLO distribution function. Ain Shams Engineering Journal, 12(4), 4037–4044. Retrieved from https://doi.org/10.1016/j.asej.2021.02.029

Jebur, I. G., Kalaf, B. A., & Salman, A. N. (2020). On Bayesian Estimation of System Reliability in Stress - Strength Model Based on Generalized Inverse Rayleigh Distribution. IOP Conference Series: Materials Science and Engineering, 871(1). Retrieved from https://doi.org/10.1088/1757-899X/871/1/012053

Karam, N. S., & Khaleel, A. H. (2019). Generalized inverse Rayleigh reliability estimation for the (2+1) cascade model. AIP Conference Proceedings, 2123(July). Retrieved from https://doi.org/10.1063/1.5116973

Karam, N. S., Yousif, S. M., Karam, G. S., & Abood, Z. M. (2022). Cascade Stress-Strength Reliability for P(X

Khaleel, A. H. (2021a). Exponential Reliability Estimation of ( 3 + 1 ) Cascade Model. MJPS, (2). Retrieved from https://doi.org/10.18081/2226-3284/5-10/46-54

Khaleel, A. H. (2021b). Reliability Estimation for ( 2 + 2 ) Cascade Model. Turkish Journal of Computer and Mathematics Education, 12(14), 1535–1545.

Khaleel, A. H. (2021c). Reliability of one Strength-four Stresses for Lomax Distribution. Journal of Physics: Conference Series, 1879(3). Retrieved from https://doi.org/10.1088/1742-6596/1879/3/032015

Khaleel, A. H., & Karam, N. S. (2019). Estimating the reliability function of (2+1) cascade model. Baghdad Science Journal, 16(2), 395–402. Retrieved from https://doi.org/10.21123/bsj.2019.16.2.0395

Khaleel, A. H., & Khlefha, A. R. (2021). Reliability of ( 1 + 1 ) Cascade Model for Weibull Distribution Abstract This study present derives the formula mathematical for reliability cascade model ( 1 + 1 ) for Weibull distribution . Model are stress and strength distributions . The ML , Pr , and, 1(February), 1–4. Retrieved from https://doi.org/10.36462/H.Sci.202101

Khan, A. H., & Jan, T. R. (2014). Estimation of multi component systems reliability in stress-strength models. Journal of Modern Applied Statistical Methods, 13(2), 389–398. Retrieved from https://doi.org/10.22237/jmasm/1414815600

Patowary, A. N., Hazarika, J., & Sriwastav, G. L. (2018). Reliability estimation of multi-component cascade system through Monte-Carlo simulation. International Journal of Systems Assurance Engineering and Management, 9(6), 1279–1286. Retrieved from https://doi.org/10.1007/s13198-018-0716-y

Salman, A. N., & Hamad, A. M. (2019). On estimation of the stress-Strength reliability based on lomax distribution. IOP Conference Series: Materials Science and Engineering, 571(1). Retrieved from https://doi.org/10.1088/1757-899X/571/1/012038

Sarhan, A. M., & Tolba, A. H. (2023). Stress-strength reliability under partially accelerated life testing using Weibull model. Scientific African, 20. Retrieved from https://doi.org/10.1016/j.sciaf.2023.e01733

Shang, L., & Yan, Z. (2024). Reliability estimation stress–strength dependent model based on copula function using ranked set sampling. Journal of Radiation Research and Applied Sciences, 17(1), 100811. Retrieved from https://doi.org/10.1016/j.jrras.2023.100811

DOI: https://doi.org/10.20961/jmme.v14i2.84510

Refbacks

  • There are currently no refbacks.