Accreditation:
Indexed by:
ISSN:
Tools
ABSTRACT. The growth of the packaged beverages market in Indonesia is overgrowing. One sector of packaged beverages is carbonated beverages and bottled water. The main problem with packaged beverages containing dissolved gases is maintaining product quality during shelf life. Packaging materials and packaging lids cause a decrease in dissolved gas levels in beverages. Therefore, this study aims to analyze leaks in polyethylene terephthalate and glass bottles so that can use them to estimate the shelf life of the product. This study uses water, 3 types of glass bottles, and 1 type of plastic bottle. Bottles filled with water with various filling volumes of 40%v/v, 60%v/v, and 80%v/v were then analyzed for bottle leakage for 8 days. The results showed that effectively used a glass bottle with a volume of 250mL filled with more than 80%v/v, this was because it had the least leakage rate compared to others. In addition, this bottle has an attractive visual, easy labeling, and the size is not too large (ergonomic).
Keywords: Glass bottle, plastic bottle, leakage test, shelf life
[1] G. Liger-Belair, F. Sternenberg, S. Brunner, B. Robillard, C. Cilindre, “Bubble dynamics in various commercial sparkling bottled waters,” J. Food Eng. 163 60–70 (2015).
https://doi.org/10.1016/j.jfoodeng.2015.04.016.
[2] E. Equipe, A. Gsma, U.M.R. Cnrs, U.D.R. Champagne-ardenne, “Carbon Dioxide in Bottled Carbonated Waters and Subsequent Bubble Nucleation under Standard Tasting Condition,” (2019). https://doi.org/10.1021/acs.jafc.9b00155.
[3] V. Meylani, R.R. Putra, “Analisis E. Coli Pada Air Minum Dalam Kemasan Yang Beredar Di Kota Tasikmalaya,” Bioeksperimen J. Penelit. Biol. 5 121–125 (2019).
https://doi.org/10.23917/bioeksperimen.v5i2.9241.
[4] P.R. Ashurst, Chemistry and Technology of Soft Beverages and Fruit Juice, 3rd Edition, 2016.
[5] D.P. Steen, P.R. Ashurst, Carbonated Soft Beverages: Formulation and Manufacture, 2007. https://doi.org/10.1002/9780470996034.
[6] U.E. Saputro, “Air Minum Peroksigen melalui Oksigenasi Air,” Inst. Teknol. Bandung. 1 1–12 (2015).
[7] D.H.M. Si., M.P. Drs. Syukri S, Kesetimbangan fasa, Padang, Sumatra Barat, 2013.
[8] E. Mohammadian, H. Hamidi, M. Asadullah, A. Azdarpour, S. Motamedi, R. Junin, “Measurement of CO2 Solubility in NaCl Brine Solutions at Different Temperatures and Pressures Using the Potentiometric Titration Method,” J. Chem. Eng. Data. 60 2042–2049 (2015). https://doi.org/10.1021/je501172d.
[9] G.V. Uña, F.C. Romero, G.P. Goncalves, J.P. Lorenzo, “Solubility of CO2 in Aqueous Solutions of Saccharose, Glucose, Fructose, and Glycerin,” J. Chem. Eng. Data. 39 639–642 (1994). https://doi.org/10.1021/je00016a002.
[10] T.F. Calix, G. Ferrentino, M.O. Balaban, “Measurement of high-pressure carbon dioxide solubility in orange juice, apple juice, and model liquid foods,” J. Food Sci. 73 439–445 (2008). https://doi.org/10.1111/j.1750-3841.2008.00945.x.
[11] M.A. Joslyn, H. Supplee, “Solubility of Oxygen in Solutions of Various Sugar,” 209–215 (1948).
[12] C. Descoins, M. Mathlouthi, M. Le, J. Hennequin, “Food Chemistry Carbonation monitoring of beverage in a laboratory scale unit with on-line measurement of dissolved CO 2,” (2020). https://doi.org/10.1016/j.foodchem.2004.11.031.
[13] A. Pertiwi, Khambali, Rusmiati, “Uji Kadar Oksigen pada Air Minum Kemasan dan Faktor-Faktor yang Mempengaruhi Kandungan Oksigen Tahun 2015,” Gema Kesehat. Lingkung. 13 125–128 (2015).
[14] B. Simanjuntak, D. Adawiyah, E. Purnomo, “Stabilitas Gas Karbondioksida pada Minuman Berkarbonasi Selama Penyimpanan,” J. Mutu Pangan. 3 45–49 (2016).
[15] B. Kemp, H. Alexandre, B. Robillard, R. Marchal, “Review : Effect of production phases on bottle fermented sparkling wine quality .,” J. Agric. Food Chem. 1–72 (2014). https://doi.org/10.1021/jf504268u.
[16] S.J. Risch, “Food Packaging History and Innovations,” J. Agric. Food Chem. 57 8089–8092 (2009). https://doi.org/10.1021/jf900040r.
[17] S. Mukhtar, M. Nurif, “Peranan Packaging dalam Meningkatkan Hasil Produksi terhadap Konsumen,” J. Sos. Hum. 8 181–191 (2015).
[18] P. Schmid, F. Welle, “Chemical Migration from Beverage Packaging Materials—A Review,” Beverages. 6 1–19 (2020). https://doi.org/10.3390/beverages6020037.
[19] D. Restuccia, U.G. Spizzirri, O.I. Parisi, G. Cirillo, M. Curcio, F. Iemma, F. Puoci, G. Vinci, N. Picci, “New EU regulation aspects and global market of active and intelligent packaging for food industry applications,” Food Control. 21 1425–1435 (2010). https://doi.org/10.1016/j.foodcont.2010.04.028.
[20] R.D. Kurniawati, “Kemasan Kaca,” (2016).
[21] M. Glevitzky, G. Brusturean, D. Perju, G. Lasl, L. Matyas, “Studies Regarding the Variation of Carbon Dioxide in Certain Carbonated Beverages Stored in Polyethylene Terephthalate Bottles,” 50 1–2 (2005).
[22] D.A.F. Faria, A.G.F. Van Dender, A.G. Cruz, “Packaging system and probiotic dairy foods,” Food Res. Int. 40 951–956 (2007). https://doi.org/10.1016/j.foodres.2007.05.003.
[23] F. Licciardello, C. Coriolani, G. Muratore, “Improvement of CO2 Retention of PET Bottles for Carbonated Soft Beverages,” Ital. Jouornal Food Sci. (2014).
[24] M.L. Kobayashi, Glass Packaging Properties and Attributes, Elsevier, 2016. https://doi.org/10.1016/b978-0-08-100596-5.03191-7.
[25] R. Wiebe, V.L. Gaddy, “The Solubility of Carbon Dioxide in Water at Various Temperatures from 12 to 40° and at Pressures to 500 Atmospheres. Critical Phenomena,” J. Am. Chem. Soc. 62 815–817 (1940). https://doi.org/10.1021/ja01861a033.
[26] T. Susana, “Karbon Dioksida,” Oseana. XIII 1–11 (1988).
[27] A. Babader, Enhancing Designed Reuse of Beverage Packaging, Elsevier Inc., 2019. https://doi.org/10.1016/b978-0-12-816683-3.00012-8.
[28] A.N. Maulani, R. Fetrianggi, I.S. Prana, “Analisis Pengaruh Desain Kemasan dan Brand Image Kopi Good Day Pada Minat Beli Konsumen,” 1 1–9 (2021).
https://ejournal.upi.edu/index.php/FINDER/article/view/34054/14643.
[29] F. Ummaya Santi, “Teknik pengemasan dan labelling produk makanan,” Makal. Pengabdi. Masy. Univ. Negeri Yogyakarta. 10 (2015). staffnew.uny.ac.id.
[30] M. Yani, E. Warsiki, “Life Cycle Assessment (LCA) of Glass Bottle for Tea Drinking,” J. Teknol. Ind. Pertan. (2014).
[31] M. Yani, E. Warsiki, N. Wulandari, “Penilaian Daur Hidup Botol PET (Polyethylena Terephtalate) pada Produk Minuman,” J. Bumi Lestari. 13 307–317 (2013).
[32] D.B. Prasetyo, M.A. Surya, N.I. Restyana, T. Hamidah, Perbandingan Life Cycle Assessment Kemasan Botol Plastik dan Botol Gelas, 2011.
[33] I. Purwaningsih, S. Surachman, P. Pratikto, I. Santoso, “Influence of Packaging Element on Beverage Product Marketing,” Int. Rev. Manag. Mark. 9 205–210 (2019).