Perbaikan Proses Produksi Menggunakan ECRS Based Line Balancing pada Lini Perakitan Stator 4

Oksiana Tiovani; Fakhrina Fahma

doi:10.20961/performa.18.1.30202

Perbaikan Proses Produksi Menggunakan ECRS Based Line Balancing pada Lini Perakitan Stator 4

Oksiana Tiovani, Fakhrina Fahma

Abstract

PT. XYZ is one of the manufacturing companies in Indonesia. The company produces water pumps. An important component in the water pump is the stator. The observation results in the Stator Assembly line 4 show that low line efficiency occurs because the production process has not run optimally. So that an improvement in the production process is important to do on this line. One method to improve the production process is ECRS based line balancing. By still considering the concept of line balancing, line efficiency can be improved through improving the production process. Through the improvement of the production process, there was a decrease in the number of work stations from 10 work stations to 9 work stations, improvement of line layout and 7th work station (Heating Air Dryer), also an increase in line efficiency from 74.72% to 81.09%.

Keywords

ECRS; proses produksi; keseimbangan lini; perakitan

Full Text:

PDF

References

Amran, T.G. dan Wibowo, N.C. (2018). Perbaikan Proses Produksi Sistem Pengereman Kendaraan Bermotor dengan Metode ECRS-Base Line Balancing. Prosiding Seminar Nasional Pakar, hal. 193-204. (Surakarta, 24 Maret 2019).

Andriani, D.P. (2017). Penentuan Waktu dan Output Baku Pada Proses Produksi Tube Lamp dengan Methods Time Measurement, Vol. 21, No. 3, [online] https://www.neliti.com/id/publications/ 197007/penentuan-waktu-dan-output-baku-pada-proses-produksi-tube-lamp-dengan-methods-ti (Diakses 24 Maret 2019).

Gaspersz, V. (2004). Operation Planning And Inventory Control. PT Gramedia Pustaka Utama, Jakarta.

Marfuah, U., dan Alfiat, C.N. (2014). Analisis Kebutuhan Man Power dan Line Balancing Jalur Supply Body 3 D01N PT. Astra Daihatsu Motor Karawang Assembly Plant (KAP), Vol. 1, No. 1, [online] https://jurnal.umj.ac.id/index.php/jisi/article/view/925 (Diakses 24 Maret 2019).

Nabi, F., Mahmud, R., Islam, M. Md. (2015). Improving Sewing Section Efficiency through Utilization of Worker Capacity by Time Study Technique, Vol. 4, No. 1, [online] http://article.sapub.org/ 10.5923.j.textile.20150401.01.html (Diakses 8 Mei 2019).

Ongkunaruk, P. dan Wongsatit, W. (2014). An ECRS-based line balancing concept: a case study of a frozen chicken producer, Vol. 20, No. 5, [online] https://www.emerald.com/insight/content/ doi/10.1108/BPMJ-05-2013-0063/full/html (Diakses 24 Maret 2019).

Suhardi, B., Anisa, N., Laksono, P.W. (2019). Minimizing waste using lean manufacturing and ECRS principle in Indonesian furniture industry, [online] https://www.researchgate.net/publication/ 330348401_Minimizing_waste_using_lean_manufacturing_and_ECRS_principle_in_Indonesian_furniture_industry (Diakses 22 Juli 2019).

DOI: https://doi.org/10.20961/performa.18.1.30202