Developing Production Planning and Control System by Applying Dispatching Rules: A Case Study at A Packaging Manufacturer

Fransiskus Xaverius Dimas Adrian Brahmantyo, Ivan Kurniawan, Triarti Saraswati

Abstract

Production planning and control (PPIC) is a critical element in manufacturing process. PPIC consists of a lot of activities which lead complexity within its system. Problems such as amount of safety stock, parts inventory, and production scheduling commonly occurs within manufacturing process. A need of efficient PPIC system become an important factor in smoothing the production process which affect company’s profitability and sustainability. This research provides production planning and control system which developed based on implementation of pull system, optimal safety stock calculation, and dispatching rules for the sequencing of the production scheduling. A case study in a packaging manufacturer is provided for testing the proposed system. A comparison analysis is conducted and it consists of the safety stock calculation, parts inventory on hand, and the economic analysis. From the improvements, positive results are obtained. The accumulation of final parts inventory and average daily parts inventory are reduced up to 38%. Safety stock of sub-product reduced up to 82% and the safety stock of holding cost are reduced by 77%.

Keywords

Production Planning and Control; Pull System; Dispatching Rules; Safety Stock; Inventory Management,;Packaging Manufacturer

Full Text:

PDF

References

Afolalu, S. A., Matthew, B. B., Ongbali, S. O., Abdulkareem, A., Emetere, M. E., & Iheanetu, O. U. (2021). Overview impact of planning in production of a manufacturing sector. IOP Conference Series: Materials Science and Engineering, 1036(1), 012060. https://doi.org/10.1088/1757-899x/1036/1/012060

Ahmed, A., Page, J., & Olsen, J. (2020). Enhancing Six Sigma methodology using simulation techniques: Literature review and implications for future research. International Journal of Lean Six Sigma, 11(1), 211–232. https://doi.org/10.1108/IJLSS-03-2018-0033

Arafeh, M., Barghash, M. A., Haddad, N., Musharbash, N., Nashawati, D., Al-Bashir, A., & Assaf, F. (2018). Using six sigma DMAIC methodology and discrete event simulation to reduce patient discharge time in king hussein cancer center. Journal of Healthcare Engineering, 2018. https://doi.org/10.1155/2018/3832151

Becker, J., Hartmann, W., Bertsch, S., Nywlt, J., & Schmidt, M. (2013). Dynamic Safety-Stock Calculation. 7(10), 2060–2063.

Chen, X., Wen Lin, H., & Murata, T. (2012). Composite dispatching rule design for dynamic scheduling with customer-oriented production priority control. IEEJ Transactions on Electrical and Electronic Engineering, 7(1), 53–61. https://doi.org/10.1002/tee.21695

Cheng, Y. (2023). An Overview of Production Strategy and Pricing Strategy of Standard and Customized Enterprises. Journal of Innovation and Development, 3(1), 27–29. https://doi.org/10.54097/jid.v3i1.8415

Chik, M. A., Ahmad, I., & Jamaluddin, M. Y. (2004). An alternative approach to measures the application of dispatching rule in the wafer foundry. Proceedings ICSE 2004 - 2004 IEEE International Conference on Semiconductor Electronics, 00(c), 642–644. https://doi.org/10.1109/smelec.2004.1620968

Javadian Kootanaee, A., Babu, K. N., & Talari, H. F. (2013). Just-In-Time Manufacturing System: From Introduction to Implement. SSRN Electronic Journal, 1(2), 7–25. https://doi.org/10.2139/ssrn.2253243

Kaban, A. K., Othman, Z., & Rohmah, D. S. (2012). Comparison of dispatching rules in job-shop Schedulingproblem Usingsimulation: A case study. International Journal of Simulation Modelling, 11(3), 129–140. https://doi.org/10.2507/IJSIMM11(3)2.201

Leng, J., Liu, Q., Ye, S., Jing, J., Wang, Y., Zhang, C., Zhang, D., & Chen, X. (2020). Digital twin-driven rapid reconfiguration of the automated manufacturing system via an open architecture model. Robotics and Computer-Integrated Manufacturing, 63(September 2019). https://doi.org/10.1016/j.rcim.2019.101895

Liu, M., Yang, T., & Li, Q. (2022). Dynamic Production Control and Optimization under Low Carbon Economy considering Delivery Time Demand. Computational Intelligence and Neuroscience, 2022. https://doi.org/10.1155/2022/4535383

Mrugalska, B., & Wyrwicka, M. K. (2017). Towards Lean Production in Industry 4.0. Procedia Engineering, 182(June), 466–473. https://doi.org/10.1016/j.proeng.2017.03.135

Ngniatedema, T., Shanker, M., Hu, M. Y., Guiffrida, A. L., & Eddy Patuwo, B. (2015). Late customization strategy with service levels requirements. International Journal of Production Economics, 166, 72–84. https://doi.org/10.1016/j.ijpe.2015.04.001

Pallant, J. L., Sands, S., & Karpen, I. O. (2020). The 4Cs of mass customization in service industries: a customer lens. Journal of Services Marketing, 34(4), 499–511. https://doi.org/10.1108/JSM-04-2019-0176

Peeters, K., & van Ooijen, H. (2020). Hybrid make-to-stock and make-to-order systems: a taxonomic review. International Journal of Production Research, 58(15), 4659–4688. https://doi.org/10.1080/00207543.2020.1778204

Seyedan, M., Mafakheri, F., & Wang, C. (2023). Order-up-to-level inventory optimization model using time-series demand forecasting with ensemble deep learning. Supply Chain Analytics, 3(June), 100024. https://doi.org/10.1016/j.sca.2023.100024

Shi, X., Lin, J., & Zheng, M. (2020). Production decisions for standard and customized products with postponement. IEEE International Conference on Industrial Engineering and Engineering Management, 2020-December, 741–745. https://doi.org/10.1109/IEEM45057.2020.9309744

Singh, G., & Ahuja, I. S. (2012). Just-in-time manufacturing: literature review and directions. International Journal of Business Continuity and Risk Management, 3(1), 57. https://doi.org/10.1504/ijbcrm.2012.045519

Trimarjoko, A., Purba, H. H., & Nindiani, A. (2020). Consistency of dmaic phases implementation on six sigma method in manufacturing and service industry: A literature review. Management and Production Engineering Review, 11(4), 34–45. https://doi.org/10.24425/mper.2020.136118

Tsai, C.-H., Huang, C.-L., Li, R.-K., Chung, Y.-C., & Shih, C.-H. (2014). A Comparative Study of Pull and Push Production Methods for Supply Chain Resilience Pull and Push Production Methods for Supply Chain Resilience. International Journal of Operations and Logistics Management, 3(1), 1–15. www.absronline.org/journals

Wedowati, E. R., Singgih, M. L., & Gunarta, I. K. (2018). A study of consumer preferences for customized product design. MATEC Web of Conferences, 204, 1–7. https://doi.org/10.1051/matecconf/201820401002

Wu, W., Sun, X., Man, G., Li, S., & Bao, L. (2023). Interactive Multifactorial Evolutionary Optimization Algorithm with Multidimensional Preference Surrogate Models for Personalized Recommendation. Applied Sciences (Switzerland), 13(4). https://doi.org/10.3390/app13042243

Wyrwa, J., & Barska, A. (2017). Innovations in the food packaging market: active packaging. European Food Research and Technology, 243(10), 1681–1692. https://doi.org/10.1007/s00217-017-2878-2

DOI: https://doi.org/10.20961/performa.24.1.90940

Refbacks

  • There are currently no refbacks.