Designing Factory Layout and Facilities for Car Front Door Production with CORELAP: A Case Study at PT GMI

B. Handoko Purwojatmiko; Fredy Sumasto; Takbir Dhuha Shaffah Ahmad; Shafira Fitriani Hastin

doi:10.20961/performa.24.1.86833

Designing Factory Layout and Facilities for Car Front Door Production with CORELAP: A Case Study at PT GMI

B. Handoko Purwojatmiko, Fredy Sumasto, Takbir Dhuha Shaffah Ahmad, Shafira Fitriani Hastin

Abstract

The automotive manufacturing industry is experiencing significant development and has increasingly complex market demand dynamics. The industrial transformation resulting from these developments has had a significant impact on several automotive manufacturing companies. The value of production efficiency, on-time delivery, and product quality means that companies must have the right strategy in meeting customer demand. Fulfilling customer requests can be realized by opening new adequate facilities. Factory layout and facility design can be a key factor in achieving this goal, especially in the production of front door components model. This research aims to comprehensively detail the design of the factory layout and facilities using the CORELAP method. CORELAP implementation involves collecting supporting data, including Operation Process Chart (OPC), Routing Sheet, Floor Area Requirement, Activity Relationship Chart (ARC), and Activity Relationship Diagram (ARD). The CORELAP method prioritizes spatial relationships to ensure that closely related facilities are strategically located. Design This layout design was created to provide an overview of the strategy for structuring production facilities and their supports to produce an effective and efficient design. Apart from the overview, the analysis carried out can also provide space for stakeholders to be able to utilize the CORELAP strategy in creating new factory layouts and facilities to support improving the company's work performance and meet customer satisfaction. The cost of material handling is calculated to determine the expenses involved in establishing a production facility for car front doors, totaling IDR 763,959. This cost is approximately 10% lower than the current material handling cost, which is IDR 856,888. The results of this research are design proposals that can be utilized or taken into consideration by industrial stakeholders.

Keywords

Automotive Manufacture; CORELAP; Design; Door Production; Factory Layout

Full Text:

PDF

References

Bazargan-Lari, M. (1999). Layout designs in cellular manufacturing. European Journal of Operational Research, 112(2), 258–272. https://doi.org/10.1016/S0377-2217(98)00164-7

Cahyani, B., Klarisa, E., Salcea, I., Hakiem Sinatrya, R., & Alfather, M. (2023). Analisis Perancangan Tata Letak Ritel Abdidaya Mart dengan Metode Total Closeness Rating (TCR). Jurnal Teknologi, 16, 81–86. https://doi.org/10.34151/jurtek.v16i1.4341

Chakroun, A., Zribi, H., Hani, Y., El Mhamedi, A., & Masmoudi, F. (2022). Facility Layout Design through Integration of Lean Manufacturing in Industry 4.0 context. IFAC-PapersOnLine, 55, 798–803. https://doi.org/10.1016/j.ifacol.2022.09.507

Gómez, A., Fernández, Q. I., De la Fuente García, D., & García, P. J. (2003). Using genetic algorithms to resolve layout problems in facilities where there are aisles. International Journal of Production Economics, 84(3), 271–282. https://doi.org/10.1016/S0925-5273(02)00468-1

Hakim, I., & Istiyanti, V. (2015). Improvement of Layout Production Facilities for a Secondary Packaging Area of a Pharmaceutical Company in Indonesia using the Corelap Method. International Journal of Technology, 6, 1006. https://doi.org/10.14716/ijtech.v6i6.1449

Halim, N. H. A., Yusuf, N., Jaafar, R., Jaffar, A., Kaseh, N. A., & Azira, N. N. (2015). Effective Material Handling System for JIT Automotive Production Line. Procedia Manufacturing, 2, 251–257. https://doi.org/https://doi.org/10.1016/j.promfg.2015.07.044

Janani, R., & Sankar, A. (2021). Material management and effective utilization of materials. Materials Today: Proceedings, 37(Part 2), 3118–3124. https://doi.org/10.1016/J.MATPR.2020.09.022

Jati, N., Rahayu, A., Salsabila, S. E., & Azzam, A. (2020). Facility Layout Design with Corelap Algorithm for Educational Tour. IOP Conference Series: Materials Science and Engineering, 982, 012060. https://doi.org/10.1088/1757-899X/982/1/012060

Kanishka, K., & Acherjee, B. (2023). Revolutionizing manufacturing: A comprehensive overview of additive manufacturing processes, materials, developments, and challenges. Journal of Manufacturing Processes, 107, 574–619. https://doi.org/10.1016/J.JMAPRO.2023.10.024

Kathmann, T., Reh, D., & Arlinghaus, J. C. (2023). Autonomous vehicles as self-driving assembly items: Functional requirements and ramifications for assembly sequences, automotive design and performance. Journal of Manufacturing Systems, 70, 327–344. https://doi.org/https://doi.org/10.1016/j.jmsy.2023.08.003

Kovács, G., & Kot, S. (2017). Facility layout redesign for efficiency improvement and cost reduction. Journal of Applied Mathematics and Computational Mechanics, 16(1), 63–74. https://doi.org/10.17512/jamcm.2017.1.06

Li, Y., Liao, P., Song, Y., & Chi, H. (2023). A systematic decision-support approach for healthcare facility layout design integrating resource flow and space adjacency optimization with simulation-based performance evaluation. Journal of Building Engineering, 77, 107465. https://doi.org/10.1016/J.JOBE.2023.107465

Lufika, R., Sentia, P., & Maulana, I. (2021). Comparison of BLOCPLAN and CORELAP algorithm for Material Handling Improvement at M Bakery. IOP Conference Series: Materials Science and Engineering, 1082, 012006. https://doi.org/10.1088/1757-899X/1082/1/012006

Methalina, V. A., Irwan, H., Togi S, R. P., Kepulauan Batam Jl Batu Aji Baru, R., & Riau, K. (2021). Perencanaan Kapasitas Produksi ATV 32C Dengan Menggunakan Capacity Requirement Planning (CRP) (Studi kasus di PT Schneider Electric Manufacturing Batam). Sigma Teknika, 4(1), 31–38.

Muchlisin, M., Ramadhandy, R., Rosyid, R., & Sugito, S. (2022). Usulan Perbaikan Metode Kerja Pada Produksi Mur di PT Tiga Sinar Mandiri Dengan Man dan Machine Chart. Bulletin of Applied Industrial Engineering Theory, 3(1), 65–70.

Muralidhar, P. (2018). Analysis on improving operational efficiency of construction project site. Independent Journal of Management & Production, 9, 827. https://doi.org/10.14807/ijmp.v9i3.686

Permatasari, A., Pramandha, F., Karima, M., & Santoso, E. (2020). Re-layout facility to minimize defects and production cost in PT. Sendanis Jaya Makmur. IOP Conference Series: Earth and Environmental Science, 426, 012166. https://doi.org/10.1088/1755-1315/426/1/012166

Saffanah, S., Imran, R. A., & Anggraeni, S. (2023). Usulan Perancangan Tata Letak Lantai Produksi Dengan Menggunakan Metode SLP dan Blocplan pada Produk Cutting Steel Pipe di CV ABC Cileungsi. Jurnal Rekayasa Sistem Industri, 8(2), 17–27.

Sundin, E., Björkman, M., Eklund, M., Eklund, J., & Engkvist, I. L. (2011). Improving the layout of recycling centres by use of lean production principles. Waste Management, 31(6), 1121–1132. https://doi.org/10.1016/J.WASMAN.2010.12.021

Süße, M., & Putz, M. (2021). Generative design in factory layout planning. Procedia CIRP, 99, 9–14. https://doi.org/10.1016/j.procir.2021.03.002

Tarigan, U., Cahyo, F. D., Tarigan, U. P. P., & Ginting, E. (2019). Facility Layout Design Through Integration of Lean Manufacturing Method and CORELAP Algorithm in Concrete Factory. IOP Conference Series: Materials Science and Engineering, 505(1). https://doi.org/10.1088/1757-899X/505/1/012015

Wahyukaton, & Affifah, G. (2019). Redesign of office layout using activity relationship chart (ARC) at the “X” department administration office of a “Y” university. IOP Conference Series: Materials Science and Engineering, 528(1), 012056. https://doi.org/10.1088/1757-899X/528/1/012056

Wilasto, A. R., & Wibisono, M. A. (2023). Rearranging Production Facilities on Electric Vehicles with the CORELAP Algorithm. AL-MIKRAJ Jurnal Studi Islam Dan Humaniora (E-ISSN 2745-4584), 4(1), 376–388. https://doi.org/10.37680/almikraj.v4i1.3752

Yang, Z., & Lu, W. (2023). Facility layout design for modular construction manufacturing: A comparison based on simulation and optimization. Automation in Construction, 147, 104713. https://doi.org/10.1016/J.AUTCON.2022.104713

Zedgenizov, A., Seliangin, K., & Efremenko, I. (2020). Methodology for assessing required area for allocating centers of mass attraction in layout of urbanized territories and their impact on quality of traffic management in adjacent street and road network. Transportation Research Procedia, 50, 743–748. https://doi.org/10.1016/J.TRPRO.2020.10.087

Zhao, G., Liu, S., Wang, Y., Lopez, C., Zubairu, N., Chen, X., Xie, X., & Zhang, J. (2022). Production Planning & Control The Management of Operations ISSN: (Print) (Modelling enablers for building agri-food supply chain resilience: insights from a comparative analysis of Argentina and France Modelling enablers for building agri-food supply chain resilience: insights from a comparative analysis of Argentina and France. Production Planning & Control, 35. https://doi.org/10.1080/09537287.2022.2078246

DOI: https://doi.org/10.20961/performa.24.1.86833