Evaluasi Kriteria Pemilihan Supplier Material Auxiliary Engine Shipyard Menggunakan Metode Cut-off point

Santika Sari, Rizqi Mubaroq

Abstract

Supplier selection is one of the most important activities for increasing the company's effectiveness and efficiency in supplying raw materials from suppliers. In this study, problems were found in the procurement of auxiliary engine material, which is one of the most important materials in the long-term part of the ship, which is carried out every 1-2 years with a level of ordering 10 to 20 materials per message to avoid errors in the supplier selection criteria. This study aims to determine and identify the criteria and sub-criteria for consideration used in the selection of suppliers. The study uses the Cut-off point method to evaluate supplier criteria. Based on the calculation results of the natural Cut-off point obtained each criteria and sub-criteria as follows: price: X11; quality: X21, and X23; shipping: X33 and X34; response: X41 and X42; and services: X52, X53, and X54. Obtained results from 20 sub-criteria to 10 sub-criteria that are of concern and relevance to the company in the selection of suppliers of auxiliary engine shipyard materials

Keywords

Supply Chain Management; Cut-Off Point; Criterion; Supplier;

References

Amid, A., Ghodsypour, S. H., and O’Brien, C. A., Weighted Max–Min Model for Fuzzy MultiObjective Supplier Selection in a Supply Chain, International Journal Production Economics, 131, 2011, pp. 139–145.

Avila, P., Mota, A., Pires, A., Bastos, J., Putnik, G., & Teixeira, J. (2012). Supplier's selection model based on an empirical study. Procedia Technology, 625-634.

Gencer, C., and Gurpinar, D., Analytic Network Process in Supplier Selection: A Case Study in an Electronic Firm, Journal of Applied Mathematical Modeling, 31, 2007, pp. 2475-2486.

Ghodsypour, S. H., and O’Brien C., The Total Cost of Logistics in Supplier Selection, under Conditions of Multiple Sourching, Multiple Criteria and Capacity Constraints, International Journal of Production Economics, 73, 2001, pp. 15-27

Ling Li 2007. Pearson International Edition Operation management. Eighth Edition. Penerbit Pearson Prentice.

Mayasari, Viona. 2008. Analisis strategi Bersaing Industri Kecil Makanan Tradisional Khas Kota Pyakumbuh. Skripsi. Bogor: IPB.

Ngatawi, & Setyaningsih, I. (2011). Analisis Pemilihan Supplier Menggunakan Metode Analytical Hierarchy Process (AHP). Jurnal Ilmiah Teknik Industri, Vol. 10, No. 1, 7-13.

Prasetyo, E. B., & Kurniati, N. (2017). Pemilihan Supplier Berdasarkan Indeks Kapabilitas dengan Karakteristik Tunggal. Jurnal Manajemen Industri dan Logistik , Vol. 1, No. 2, 113 - 118.

Pujawan, I. Nyoman. 2005. Supply Chain Management. Surabaya: Guna Widya

Roger. G. 2004. Operation management, contemporary concepts and cases.Third Edition. Penerbit Mc Graww-Hill Internasional Edition

Septiani Winnie, (2009). Pendekatan Kombinasi Metode AHP Dan Metode Cut Off Point Pada Tahap Analisis Keputusan Perancangan Sistem Informasi Penjualan PT. X. Universitas Diponegoro, Vol. IV, No 3.

Stevenson, J William. 2002. Operation Management.NewYork: McGrawHill

Tracey, M., & Tan, C. L. (2001). Empirical analysis of supplier selection and involvement, customer satisfaction, and firm performance. Supply Chain Management An international Journal, 174- 188.

Turban, Efraim & Aronson, Jay E. 2001. Decision Support Systems and Intelligent Systems. 6th edition. Prentice Hall: Upper Saddle River, NJ.

Yoserizal, Y., & Singgih, M. L. (2012). Integrasi Metode Dematel (Decision Making Trial and Evaluation Laboratory) Dan Anp (Analytic Network Process ) Dalam Evaluasi Kinerja Supplier Di Pt . Xyz. In Prosiding Seminar Nasional Manajemen Teknologi XV (pp. 1–8). Surabaya: Program Studi MMT-ITS.

Xia, W., & Wu, Z. (2007). Supplier selection with multiple criteria in volume discount environments. Omega, 35(5), 494-504.

DOI: https://doi.org/10.20961/performa.22.1.54263

Refbacks

  • There are currently no refbacks.