Analisis Penyebab Kerusakan Mesin Produksi Kayu Lapis

Bramantiyo Eko Putro; Moch Yusup A Aziz

doi:10.20961/performa.19.2.45381

Analisis Penyebab Kerusakan Mesin Produksi Kayu Lapis

Bramantiyo Eko Putro, Moch Yusup A Aziz

Abstract

PT. Sama Al-Tanmiah is a company engaged in the semi-finished plywood production industry. Semi-finished raw materials are further processed according to the needs of the buyer, the cause of damage is due to poor maintenance and deteriorating component quality. This research was conducted to determine the origin of the causes of damage to the production machine at PT. Same Al-Tanmiah. Retrieval of data obtained by means of interviews, observation and requesting secondary data for 6 months of production, for data processing using Fault Tree Analysis and Failure Mode and Effect Analysis. The data obtained from the company enters into data management. The next stage will be a fault tree image analysis using Microsoft Visio and weighting to the three production machines using Microsoft Excel. The results of the researchers obtained the root of the fault tree and the value of the RPN with weighted machine damage. Improvement of management and standard operating procedures (SOP).

Keywords

Kayu Lapis; Kerusakan mesin; FTA; dan FMEA

Full Text:

PDF (Bahasa Indonesia)

References

Badariah, Nurlailah, Dadang Surjasa, Yuda Trinugraha, and Jurusan Teknik Industri. 2012. “ANALISA SUPPLY CHAIN RISK MANAGEMENT BERDASARKAN METODE FAILURE MODE AND EFFECTS ANALYSIS (FMEA).” JURNAL TEKNIK INDUSTRI 2(2): 110–18.

Baqiroh, Nur Faizah Al Bahriyatul. 2019. “Produksi Kayu Olahan Diprediksi Naik 10% - Ekonomi Bisnis.Com.” Bisnis: 3–4.

Dini. 2019. “Pasok Kebutuhan Industri Kayu, 140 Kelompok Petani Hutan Difasilitasi : Okezone Economy.” Okezone: 1–2.

Fauzi, Yadi Ahmad, and Hilmi Aulawi. 2016. “ANALISIS PENGENDALIAN KUALITAS PRODUK PECI JENIS OVERSET YANG CACAT DI PD. PANDUAN ILLAHI DENGAN MENGGUNAKAN METODE FAULT TREE ANALYSIS (FTA) DAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA)".” Jurnal Kalibrasi 14(1): 29–34.

Hanif, Richma Yulinda, Hendang Setyo Rukmi, and Susy Susanty. 2015. “PERBAIKAN KUALITAS PRODUK KERATON LUXURY DI PT. X DENGAN MENGGUNAKAN METODE FAILURE MODE and EFFECT ANALYSIS (FMEA) Dan FAULT TREE ANALYSIS (FTA) * RICHMA YULINDA HANIF, HENDANG SETYO RUKMI, SUSY SUSANTY.” Jurnal Online Institut Teknologi Nasional Juli 3(3): 137–47.

Iswanto, Adi, A Jabbar, M Rambe, and Elisabeth Ginting. 2013. “APLIKASI METODE TAGUCHI ANALYSIS DAN FAILURE MODE AND EFFECT ANALYSIS (FMEA) UNTUK PERBAIKAN KUALITAS PRODUK DI PT. XYZ.” Jurnal Teknik Industri FT USU 2(2): 13–18.

Noviani, Ana. 2013. “Kebutuhan Bahan Baku Wood Working Naik 10% Per Tahun - Ekonomi Bisnis.Com.” Bisnis: 1–2.

Puspitasari, Nia Budi, and Arif Martanto. 2014. “PENGGUNAAN FMEA DALAM MENGIDENTIFIKASI RESIKO KEGAGALAN PROSES PRODUKSI SARUNG ATM (ALAT TENUN MESIN) (STUDI KASUS PT. ASAPUTEX JAYA TEGAL).” J@TI UNDIP : JURNAL TEKNIK INDUSTRI 9(2): 93–98.

DOI: https://doi.org/10.20961/performa.19.2.45381