Analyze The Effect of The Impeller Type on Bearing Rating Life

Fatchan Mubarok Tsani, Yasinta Sindy Pramesti

Abstract

One of the essential components of a balancing machine is the bearing, which is a crucial component that ensures stability, precision, and efficiency in the balancing process. Although there were high-quality bearings on the market, ongoing research was needed to ensure that balancing machine bearings could supply the specific needs of the industry and continued to improve their reliability and efficiency; the use of bearings specifically designed for balancing applications and of high-quality is necessary to ensure optimal performance and accurate results. This study aims to examine the impact of varying impeller types on balancing machine-bearing life in commercial companies. This research adopts a quantitative causality method, collecting data and samples during the study and then analyzing them using the Analysis of Variance (ANOVA) method. Bearing life is measured using a sum by combining several factors. The results of the research revealed that from ANOVA analysis with an error percentage of 0.05, a significance value of 0.006 was obtained and F = 44.582, Ftable = 9.55, which means calculated F > Ftable so it can be concluded that the type of impeller was affected bearing life.

Full Text:

PDF

References

1. R. Mihalache, I. S. Vintila, M. Deaconu, M. Sima, I. Malael, A. Tudorache, and D. Mihai, “Novel carbon fibre composite centrifugal impeller design, numerical analysis, manufacturing and experimental evaluations,” Polym., vol. 13, no. 19, article no. 3432, 2021.

2. J. Vance, F. Zeidan, and B. Murphy, Machinery Vibration and Rotordynamics, New Jersey: John Wiley & Sons, 2010.

3. J. F. Gülich, Centrifugal Pumps. New York: Springer International Publishing, 2019.

4. A. Clark, Impeller Pumps Reference Guide. British Columbia: Specific Speed Enterprises Ltd, 2018.

5. D. Norfield, Practical Balancing of Rotating Machinery, Oxford: Elsevier Science, 2005.

6. R. K. Mobley, Vibration Fundamentals, Oxford: Newnes, 1999.

7. Z. Zhang, W. Huang, Y. Liao, Z. Song, J. Shi, X. Jiang, C. Shen, and Z. Zhu, “Bearing fault diagnosis via generalized logarithm sparse regularization,” Mech. Syst. Signal Process., vol. 167, article no. 108576, 2022.

8. M. Werner, S. Emrich, O. Koch, B. Sauer, and M. Kopnarski, “Long-Term Investigations of Different Bearing Configurations at Solid-Lubricated Rolling Bearings,” Tribol. Trans., vol. 67, no. 3, pp. 401-410, 2024.

9. U. Unaijah and S. Darwis, “Prediksi Sisa Umur Bearing Menggunakan Distribusi Weibull,” Jurnal Riset Statistika, vol. 2, no. 1, pp. 75-84, 2022. (in Indonesian).

10. R. K. Mobley, Maintenance Fundamentals, Oxford: Elsevier Science, 2004.

11. D. Norfield, Practical Balancing of Rotating Machinery, Oxford: Elsevier Science, 2005.

12. Hofmann, Horizontal, hard-balancing balancing machines, Hofmann, Available in https://www.hofmann-global.com/en/products/universal-balancing-machines/horizontal.html (Accessed in January 10, 2024).

13. A. Kumar, C. P. Gandhi, Y. Zhou, R. Kumar, and J. Xiang, “Variational mode decomposition based symmetric single valued neutrosophic cross-entropy measure for the identification of bearing defects in a centrifugal pump,” Appl. Acoust., vol. 165, article no. 107294, 2020.

14. G. Vashishtha and R. Kumar, “Centrifugal pump impeller defect identification by the improved adaptive variational mode decomposition through vibration signals,” Eng. Res. Express, vol. 3, no. 3, article no. 035041, 2021.

15. G. D. Haryadi, I. Haryanto, I. M. W. Ekaputra, R. T. Dewa, and D. Setyawan, “Analisa Struktur Dan Performa Impeller Pompa Sentrifugal Dengan Menggunakan Computational Fluid Dynamic dan Finite Element Method,” Jurnal Rekayasa Mesin, vol. 13, no. 3, pp. 773-786, 2022. (in Indonesian).

16. B. Kim, M. H. Siddique, A. Samad, G. Hu, and D. E. Lee, “Optimization of Centrifugal Pump Impeller for Pumping Viscous Fluids Using Direct Design Optimization Technique,” Machines, vol. 10, no. 9, article no. 774, 2022.

17. Suharto, Pompa Sentrifugal, 1st ed. Jakarta: Ray Press, 2016.

18. S. Buchaiah and P. Shakya, “Bearing fault diagnosis and prognosis using data fusion based feature extraction and feature selection,” Measurement, vol. 188, article no. 110506, 2022.

19. A. D. Deutschman, W. J. Michels, and C. E. Wilson, Machine Design; Theory and Practice, London: Macmillan, 1975.

20. M. R. Mubarok, A. Apriana, F. Mulyana, “Studi Kasus Kerusakan Bearing Mesin Filling Up Tube Nordenmatic 702 Di PT. XYZ,” Prosiding A Seminar Nasional Teknik Mesin, vol. 13, no. 1, pp. 82-89, 2023. (in Indonesian).

21. A. Rachman, B. Hartono, and D. Yuliaji, “Analisa Getaran Pada Bearing Berbasis Kerusakan Bearing,” Aplikasi Mekanika dan Energi, vol. 4, no. 1, pp. 15-22, 2018. (in Indonesian).

22. F. Lubis, R. Pane, S. Lubis, M. A. Siregar, and B. S. Kusuma, “Analisa Kekuatan Bearing Pada Prototype Belt Conveyor,” Jurnal MESIL (Mesin Elektro Sipil), vol. 2, no. 2, pp. 51-57, 2021. (in Indonesian).

DOI: https://doi.org/10.20961/mekanika.v23i2.86101

Refbacks

  • There are currently no refbacks.