Wind Turbine Vertical Axis H Rotor Type with 1 KW Capacity at Suwuk Beach, Kebumen

Achmad Gustiantono, Dominicus Danardono Dwi Prija Tjahjana, Syamsul Hadi

Abstract

Tulisan ini membahas tentang analisa potensi energi angin di pantai Suwuk Kebumen dan perancangan turbin angin tipe H-Rotor yang sesuai dengan karakteristik angin di pantai tersebut. Analisa potensi energi angin menggunakan metode distribusi Weibull berdasarkan data kecepatan angin di lokasi pengukuran selama 2 tahun. Analisa distribusi Weibull menunjukkan karakteristik kecepatan angin di lokasi pengukuran yang akan dijadikan dasar dalam perancangan turbin angin H-Rotor. Perancangan turbin angin H-Rotor terdiri dari komponen-komponen seperti sudu, strut, dudukan strut, poros, tiang, dan generator. Diperoleh rancangan turbin angin H-Rotor dengan diameter x tinggi sebesar 2,7 x 2,7 meter menggunakan airfoil tipe NACA 0018 dengan kapasitas daya keluaran sebesar 1 kW.

Full Text:

PDF

References

S. E. Baruna, “Pusat data dan Informasi ESDM”.

Mathew and Sathyajith, “Wind Energy Fundamentals, Resource Analysis and Economics,” Springer, New York, 2006.

M. S. Hameed and A. Kamran, “Design And Analysis Of A Straight Bladed Vertical Axis Aerospace Eng., 2010.

Koksal, “Self-Starting Darrieus Wind Turbine Design Project MECH4020,” Department of Mechanical Engineering Dalhousie University, 2004.

Koksal, “Vertical Axis Wind Turbine Design Project MECH4010,” Department of Mechanical Engineering Dalhousie University, 2005.

R.W. Tresher, “Trend in Evolution of Wind Turbin Generator Configuration and Systems,” J. of Wind Ener., vol. 1, no. 1, pp. 70- 86, 1998.

R.S. Khurmi and J. K. Guptha, “A Textbook of Machine Design,” Eurasia Publishing House (Pvt) Ltd, New delhi, 2002.

K.R. Ajao and J.S.O. Adeniyi, “Comparison of Theoretical and Experimental Power output of Small 3-bladed Horizontal-axis Wind Turbine,” J. of American Sci., vol. 5, no. 4, 2009.

Blackwell, “Wind Tunnel Performance Data for Darrieus Wind Turbine With NACA 0012 Blades,” Sandia Laboratory Energy Report, 1977.

Nurchayati and W. Kade, “Karakteristik Kincir Angin Tipe Wind Mill Berbahan Fiber Metal Laminate (Fml) Pada Variasi Kecepatan Angin Dan Sudut Kemiringan Blade,” Jurnal Teknik Rekayasa, vol. 10, no. 1, pp. 1-4,

S.O. Oyedepo, S.A. Muyiwa, and S.P., Samuel, “Analysis of wind speed data and wind energy potential in three selected locations in south- east Nigeria,” J. of Ener. and Environmental Eng., vol. 3, no. 7, 2012.

M. Mulyadi, “Analisis Aerodinamika pada Sayap Pesawat Terbang dengan Menggunakan Software Berbasis Computational Fluid Dynamics (CFD),” Universitas Gunadarma, Depok, 2010.

N. Tanti and A. Arnetto, “Pembuatan Program Perancangan Turbin Savonius Tipe-U Untuk Pembangkit Listrik Tenaga Angin,” J. of Mech., vol. 2, no. 1, pp. 1-5, 2011.

H. Arwoko, “Desain Turbin Angin,” Departemen MIPA UBAYA, Surabaya, 1999.

N. Mittal, “Investigation of Performance Characteristics of a Novel VAWT,” Thesis from Depart. of Mech. Eng. University of Strathclyde, UK, 2001.

J.F. Manwell, J.G. McGowan, and A.L. Rogers, “Wind Energy Explained, Theory, Design an Aplication,” John Wiley and Son,Chichester, 2002.

Y. Daryanto, “Kajian Potensi Angin Untuk Pembangkit Listrik Tenaga Bayu,” Balai PPTAGG - UPT-LAGG, 2007.

P, Jain, “Wind Energy Engineering,” The McGraw-Hill, United States, 2011.

Islam, “Analysis Of The Design Parameters Related To A Fixed Pitch Straight-Bladed Vertical Axis Wind Turbine,” J. of Wind Eng., vol. 32, no. 5, pp. 491–507, 2008.

M. R. Sidiq, “Pembuatan dan Pengujian Turbin Angin Darrieus dengan Diameter 30 cm dan Tinggi 30 cm,” Tugas Akhir Sarjana Teknik Penerbangan UNNUR, Bandung, 2008.

DOI: https://doi.org/10.20961/mekanika.v16i1.35053

Refbacks

  • There are currently no refbacks.