Adsorption Characteristics of Silica Gel-Water Pairs in Personal Protection Equipment

Shazia Hanif, Suryadijaya Adiputra, Indri Yaningsih, Eko Prasetya Budiana

Abstract

This study aims to determine the characteristics of silica gel RD to water vapor in terms of adsorption capacity and rate. A layer modeling approach was employed to simulate the Personal Protective Equipment (PPE), which comprised four distinct layers: the surrounding environment air, the fabric layer, the RD-type silica gel layer, and the air gap separating the silica gel from the skin surface. The simulation encompassed environmental conditions set at 27 ℃, while the human body's temperature was maintained at 35 ℃. This study uses a simulation method using Guggenheim–Anderson de Boer (GAB) modeling calculations to determine isothermal characteristics and Linear Driving Force (LDF) modeling to determine kinetic characteristics with an adsorbent temperature of 26.84 ℃. The simulation results show that the isothermal characteristics of silica gel RD at a relative humidity of 60% or a relative pressure of 0.6 have an absorption capacity of 0.38 kg/kg. Moreover, the kinetic characteristics of silica gel RD have an absorption rate of 0.38 kg/kg of water vapor with a time of 980 s until a significant reduction in the absorption value occurs

Full Text:

PDF

References

1. I. Holmér, “Protective clothing and heat stress,” Ergonomics, vol. 38, pp. 166-182, 2007.

2. A. K. R. Choudhury, P. K. Majumdar, and C. Datta, Improving comfort in clothing, Cambridge: Woodhead, 2011.

3. H. Jiang, B. Cao, and Y. Zhu, “Improving thermal comfort of individual wearing medical protective clothing: Two personal cooling strategies integrated with the polymer water-absorbing resin material,” Build. Environ., vol. 243, article no. 110730, 2023.

4. D. Wang, J. Zhang, Q. Yang, N. Li, and K. Sumathy, “Study of adsorption characteristics in silica gel-water adsorption refrigeration,” Appl. Energy, vol. 113, pp. 734-741, 2014.

5. M. M. Younes, I. I. El-sharkawy, A. E. Kabeel, K. Uddin, A. Pal, S. Mitra, K. Thu, and B. B. Saha, “Synthesis and characterization of silica gel composite with polymer binders for adsorption cooling applications,” Int. J. Refrig., vol. 98, pp. 161-170, 2019.

6. Z. Arifin, S. D. Prasetyo, A. R. Prabowo, D. D. D. P. Tjahjana, and R. A. Rachmanto, “Effect of thermal collector configuration on the photovoltaic heat transfer performance with 3D CFD modeling,” Open Eng., vol. 11, no. 1, pp. 1076-1085, 2021.

7. S. D. Prasetyo, A. R. Prabowo, and Z. Arifin, “Investigation of Thermal Collector Nanofluids to Increase the Efficiency of Photovoltaic Solar Cells,” vol. 40, no. 2, pp. 415-422, 2022.

8. C. Strong, Y. Carrier, and F. H. Tezel, “Experimental optimization of operating conditions for an open bulk-scale silica gel/water vapour adsorption energy storage system,” Appl. Energy, vol. 312, article no. 118533, 2022.

9. A. Saidi, C. Gauvin, S. Ladhari, and P. Nguyen–Tri, “Advanced functional materials for intelligent thermoregulation in personal protective equipment,” Polymers (Basel)., vol. 13, no. 21, article no. 3711, 2021.

10. Z. Arifin, S. D. Prasetyo, U. Ubaidillah, S. Suyitno, D. D. D. P. Tjahjana, W. E. Juwana, R. A. Rachmanto, A. R. Prabowo, and C. H. B. Apribowo “Helmet Stick Design for BC3 Paramlympic Bocia Games,” Math. Model. Eng. Probl., vol. 9, no. 3, pp. 637-644, 2022.

11. N. Singh, V. K. Gunjan, G. Chaudhary, R. Kaluri, N. Victor, and K. Lakshmanna, “IoT enabled HELMET to safeguard the health of mine workers,” Comput. Commun., vol. 193, pp. 1-9, 2022.

12. T. M. Cook, “Personal protective equipment during the coronavirus disease (COVID) 2019 pandemic–a narrative review,” Anaesthesia, vol. 75, no. 7, pp. 920-927, 2020.

13. Z. Arifin, S. D. Prasetyo, T. Triyono, C. Harsito, and E. Yuniastuti, “Design and build a cow dung waste chopping machine,” Jurnal Rekayasa Mesin, vol. 11, no. 2, pp. 187-197, 2020. (in Indonesian).

14. D. Ding, T. Tang, G. Song, and A. Mcdonald, “Characterizing the performance of a single-layer fabric system through a heat and mass transfer model - Part I: Heat and mass transfer model,” Text. Res. J., vol. 81, no. 4, pp. 398-411, 2011.

15. D. Ding, T. Tang, G. Song, and A. Mcdonald, “Characterizing the performance of a single-layer fabric system through a heat and mass transfer model - Part II: Thermal and evaporative resistances,” Text. Res. J., vol. 81, no. 9, pp. 945-958, 2011.

16. M. Sultan, I. I. El-Sharkawy, T. Miyazaki, B. B. Saha, S. Koyama, T. Maruyama, S. Maeda, and T. Nakamura, “Insights of water vapor sorption onto polymer based sorbents,” Adsorption, vol. 21, no. 3, pp. 205-215, 2015.

17. I. I. El-Sharkawy, “On the linear driving force approximation for adsorption cooling applications,” Int. J. Refrig., vol. 34, no. 3, pp. 667-673, 2011.

18. B. B. Saha, A. Akisawa, and T. Kashiwagi, “Silica gel water advanced adsorption refrigeration cycle,” Energy, vol. 22, no. 4, pp. 437-447, 1997.

DOI: https://doi.org/10.20961/mekanika.v22i2.71250

Refbacks

  • There are currently no refbacks.