Rancang Bangun Alat Elliptical trainer Outdoor

Zainal Arifin, Singgih Dwi Prasetyo, Suyitno Suyitno, Dominicus Danardono Dwi Prija Tjahjana, Rendy Adhi Rachmanto, Wibawa Endra Juwana, Chico Hermanu B. Apribowo, Trismawati Trismawati

Abstract

The placement of outdoor fitness equipment at tourist attractions is one of the attractions for tourists. Besides that, it can also be used as a means of health socialization for the community in public places. The elliptical trainer type air walker is a popular fitness tool because it is easy to use and has a small risk of injury. Elliptical trainer has a working principle like a walking person where movement is influenced by the force of the hand and leg movements. The design of an elliptical trainer fitness equipment that will be placed in a public place needs to be done to get a good level of security. This article discusses the design of an elliptical trainer device that is safe to place outdoors. The design process uses the Solidworks 2017a application. The elliptical trainer is divided into 4 parts, namely the main frame, drive shaft, hand handle, and leg handle. The manufacturing process is carried out based on Design Manufacture and Assembly and machinery to reduce the risk of manufacturing failure and make it easier to work on. The result of the elliptical trainer design has dimensions of 2,500 x 1,800 x 1,000 mm. The main frame has a safety factor of 3 with a displacement of 8,524e-7 mm.

Full Text:

PDF

References

H. W. Chow and D. R. Wu, “Outdoor fitness equipment usage behaviors in natural settings,” International Journal of Environmental Research and Public Health, vol. 16, no. 3, 2019.

E. M. Medica et al., “The Journal of Sports Medicine and Physical Fitness This provisional PDF corresponds to the article as it appeared upon acceptance . Outdoor physical activity bears multiple benefits to health and society COPYRIGHT © EDIZIONI MINERVA MEDICA Outdoor physic,” 2019.

O. Article, “A Comparison of the Aerobic Cost in Aerobic Dance to the Energy Costs on Treadmill, Elliptical Trainer, and Bicycle Ergometry Hahn R, Kaethler R, Poblete D, Matsuda G, Wong M,” vol. 2, no. 6, pp. 12–20, 2013.

B. P. Wallace, “Comparing energy expenditure between the treadmill and elliptical trainer,” 2005.

W. Choi, A. Song, D. Edge, M. Fukumoto, and U. Lee, “Exploring user experiences of active workstations: A case study of under desk elliptical trainers,” UbiComp 2016 - Proceedings of the 2016 ACM International Joint Conference on Pervasive and Ubiquitous Computing. pp. 805–816, 2016.

F. C. Chen, Y. F. Tzeng, and M. H. Hsu, “Innovative design of an elliptical trainer with right timing of the foot trajectory,” Advances in Technology Innovation, vol. 5, no. 3, pp. 190–201, 2020.

J. M. Burnfield, Y. Shu, T. W. Buster, P. Adam, and C. A. Nelson, “Technical Report Impact of Elliptical Trainer Ergonomic Usability for People With Physical,” 2011, doi: 10.2522/ptj.20100332.

A. Roziqin, “Peningkatan Kemampuan Mahasiswa Menggunakan Metode Project Based ( Improvement of Students ’ Ability Using Project Based Competition Method,” Jurnal Pendidikan Teknik Mesin, vol. 17, no. 2, pp. 57–61, 2017.

I. Sungkono, H. Irawan, and D. A. Patriawan, “Analisis Desain Rangka Dan Penggerak Alat Pembulat Adonan Kosmetik Sistem Putaran Eksentrik Menggunakan Solidwork,” pp. 575–580, 1995.

R. Ratnayanti, M. Nugraha, and F. Yustiana, “Analisis Pemilihan Alternatif Material Pada Pembanguan Bendung (Studi Kasus Pembangunan Bendung Aporo-Sulawesi Tenggara),” Jurnal Teknik Sipil ITENAS, vol. 5, no. 1, p. 10, 2007.

Z. Arifin, S. D. Prasetyo, T. Triyono, C. Harsito, and E. Yuniastuti, “Rancang Bangun Mesin Pencacah Limbah Kotoran Sapi,” Jurnal Rekayasa Mesin, vol. 11, no. 2, pp. 187–197, 2020.

L. Marxen et al., “Concurrent engineering and DFMA/DFX in the development of automotive components,” Procedia CIRP, vol. 41, no. May, pp. 241–260, 2001.

A. Efendi, “Rancang Bangun Mobil Listrik Sula Politeknik Negeri Subang,” Jurnal Pendidikan Teknologi dan Kejuruan, vol. 17, no. 1, p. 75, 2020.

I. Djodikusumo and D. Arisandi, “Desain , Manufaktur , dan Inspeksi Produk Berbasis Fitur,” no. Snttm Xiv, pp. 7–8, 2015.

L. Widyokusumo, “Teknik Arsir dan Proses Menggambar dengan Media Pena,” Humaniora, vol. 5, no. 2, p. 909, 2014.

D. Herawati, “Kaki Manusia Sebagai Objek Estetik Penciptaan Fotografi Seni,” REKAM: Jurnal Fotografi, Televisi, dan Animasi, vol. 10, no. 1, pp. 19–37, 2014.

D. Bertol, “Designing and Making a Movement Infrastructure,” Procedia Technology, vol. 20, no. July, pp. 72–78, 2015.

C. Yin and S. Hou, “Application design for manufacture and assembly to improving product design and development performance,” 2019 ASABE Annual International Meeting, pp. 1–9, 2019.

Industry Xplore and M. Sayuti, “Perbaikan Proses Perakitan case Assembly Front With Water Pump And Oil Pump Pada Perusahaan Automotive Di Karawang,” Industry Xplore, vol. 5, no. 1, pp. 1–7, 2020.

R. Rinaldi, R. Usman, A. Fathier, J. Teknik, M. Politeknik, and N. Lhokseumawe, “Studi eksperimental kekuatan tarik dan kekerasan pada sambungan pipa ASTM A 106 Grade B dengan pengelasan SMAW,” vol. 1, no. 2, pp. 36–42, 2019.

DOI: https://doi.org/10.20961/mekanika.v19i2.44325

Refbacks

  • There are currently no refbacks.