Simulasi efisiensi motor listrik axial bldc dengan bahan soft magnetik variasi kompaksi dan perlakuan panas menggunakan perangkat lunak ansys maxwell

Rino Herwangga, Muh Nizam, Miftahul Anwar

Abstract

The research was conducted to determine the efficiency of electric motors with soft magnetic composite and laminate by used software Ansys Maxwell. Soft magnetic composite material which was given 4, 5, and 6 tons of compaction pressure from previous research performed to fill the input data on electric motor efficiency simulation. The used datas were hysterisis curve which are resulted of VSM (Vibrating Sample Magnetometer) testing. Ansys Maxwell Rmxprt was used to simulate efficiency of electric motor. The results of Ansys Maxwell Rmxprt simulation were a relation curve between the efficiency  and the rotation of the electric motor. The results simulation of efficiency electric motor using soft magnetic composite core furthermore compared to the efficiency value of electric motor using laminate core. The results showed that the efficiency value of electric motor with soft magnetic composite with compacting pressure 4, 5 and 6 tons was 89,94 %, 89,97 %, and 90,62 % respectively. Efficiency value of electric motor with core laminate material was 91,22 %. The simulation showed that the value of a compaction pressure given on soft magnetic composite material affect on the efficiency of electrical motor. As a conclusion of this research that the efficiency value of electric motor trend increase with the value of compacting pressure on the material. 

Full Text:

PDF

References

B. H. Amstead, “Teknologi Mekanik,” Erlangga, Jakarta, 1995.

Apriyanto, Makhriza, “Pengaruh Jarak Torch Pemanas Dengan Nozzle Pendingin Terhadap Kekerasan Permukaan Baja Karbon Medium Pada Proses Flame Hardening,” Surakarta, 2011.

ASTM E8/E8M-09, “Standard Test Methods for Tension Testing of Metallic Materials,”

W. D. Calister, “Materials Science and Enggineering an Introduction,” John Willy and Sons Inc., Canada, 1994.

K. Gao, X. Qin, Z. Wang, and S. Zhu, “Effect Of Spot Continual Induction Hardening On Microstructure Of Steels: Comparison Between AISI 1045 and 5140 Steels,” J. Mater. Sci. and Eng., 2016.

Retno Hayuningtyas, “Pengaruh Kecepatan Gerak Torch Pemanas Terhadap Kekuatan Impak Serta Ketahanan Aus Baja Karbon Medium Pada Proses Automatic Flame Hardening,” Surakarta, 2016.

S. Jeyaraj, K.P. Arulshri, K.P. Harshavardhan,

And P.S. Sivasakthivel, “Optimization of Flame Hardening Process Parameters Using L9 Orthogonal Array of Taguchi Approach,” Int. J. of Eng. and Applied Sci. (IJEAS), 2015.

M. K. Lee, G.H. Kim, K.H. Kim, W.W. Kim, “Control of Surface Hardnesses, Hardening Depth, and Residual Stress of Low Carbon 12Cr Steel By Flame Hardening,” Surface and Coating Technology, vol. 184, pp. 239-246, 2003.

Muh. Nurkhozin, “Pengaruh Manual Flame Hardening Pada Baja Tempa,” Surakarta, 2006.

D. S. Nugroho, “Pengaruh Kecepatan Torch dan Jenis Nyala Api Terhadap Kekerasan Permukaan Baja Karbon Pada Proses Automatic Flame Hardening,” Surakarta, 2009.

DOI: https://doi.org/10.20961/mekanika.v17i2.35128

Refbacks

  • There are currently no refbacks.