Dissemination of Pt-Ir k-112 mass measurement standards to E0-74 working standards with sub-divisional methods

Zuhdi Ismail, Renanta Hayu Kresiani

Abstract

The mass value of the weights that are the mass unit's standard must be determined correctly, especially for E0 no 74 as the national working standard. Sub-division is the method commonly used to determine the mass of these weights. The sub-division method involved three standard weights in this study, namely Pt-Ir K-112, E0 no 74, and E0 no 75. Pt-Ir was used as the measuring standard, while the E0 class weights were test weights and check standard. The mass value of both weights was determined based on the mass value of Pt-Ir, which was analyzed using the weighted least squares method. The calibration obtained that the mass values of E0 no 74 and E0 no 75 were 1000,000046 g and 1000,000163 g, respectively. In measurement, the uncertainty value becomes a very important part of being stated. The uncertainty obtained for both E0 weights is 0.036 mg.

Keywords

measurement, mass, sub-division method, Pt-Ir, measurement uncertainty

Full Text:

PDF

References

Bell, S. (2004). Measurement good practice guide No. 11. National Physical Laboratory, 2, 1–41. http://scholar.google.com/scholar?hl=en&btnG=Search&q=intitle:Measurement+Good+Practice+Guide#5 Davidson, S., Perkin, M., dan Buckley, M. (2004). Good Practice Guide no 71. The Measurement of Mass and Weight. In National Physical Laboratory (Nomor 71). Jabbour, Z. J., dan Yaniv, S. L. (2001). The kilogram and measurements of mass and force. Journal of Research of the National Institute of Standards and Technology, 106(1), 25–46. https://doi.org/10.6028/jres.106.003 JCGM-100. (2008). Evaluation of measurement data — Guide to the expression of uncertainty in measurement. International Organization for Standardization Geneva ISBN, 50(September), 134. http://www.bipm.org/en/publications/guides/gum.html Meteolabor AG. (2004). Operating instructions and technical description KLIMET A30. November, 1–17. Mettler Toledo. (2014). Comparator Balances. Pendrill, L. (1992). Calibration of Submultiple of Kilogram: Weighted Least Square Analysis of Data from Weight Set NPL W43. Swedish National Testing and Research Institute. UU RI No 20 Tahun 2014. (2014). Standardisasi dan Penilaian Kesesuaian. Vâlcu, A., dan Dinu, D. (2009). Subdivision method applied for OIML weights using an automatic comparator. 19th IMEKO World Congress 2009, 2, 1052–1056. Zelenka, Z. (2009). Dissemination of the unit of mass in a fully automatic mass laboratory using subdivision. 19th IMEKO World Congress 2009, 2, 1049–1051.

DOI: https://doi.org/10.20961/jphystheor-appl.v6i2.59195

Refbacks

  • There are currently no refbacks.