STUDY OF TENSILE STRENGTH OF WOOD CONNECTION USING WASTE PLASTIC BOTTLES CONNECTOR AS ADDITIONAL MATERIALS OF WOOD STRUCTURAL SUBJECT.

Aprilia Dwi Lestari, Anis Rahmawati, Taufiq Lilo Adi Sucipto

Abstract


This research was aims to know 1) whether there was a significant difference from tensile strength of wood connection with plastic bottle waste between A bottle, B, C, D, E, and F bottle, 2) plastic bottle which produced the wood connection with the highest tensile strength. This research used quantitative method of experimental approach. The population of this research were wood with the connection of plastic bottles by heating. This technique was inspired by Micaella Pedros, an England artist who first applied it known as Joining Bottles. Dimensions for tensile test parallel that was 2,5 x 2,5 x 46 cm with total 30 samples. The length of the bottle connection is 10 cm with 1 layer only. This research used quantitative method of experimental approach. Data analysis used one way anova test, 0.05 significance level with the requirement of normal data and homogeneous data. Statistical data of this research results showed 1) no significant difference tensile strength of the six plastic bottles connector. 2) The F bottle produced the highest tensile strength that was 0,622 MPa.

Keywords


Keywords:,Tensile Strength Wood, Wood Connection, Plastic Bottle Waste

Full Text:

PDF
rticle

References


Anonim (2014). Mengetahui Bahaya Sampah Plastik. diperoleh tanggal 15 Januari 2017 dari https://www.jurnalasia.com/ragam/ mengetahui-bahaya-sampah-plastik/

Ashori et al. (2013). Wood plastic composite using graphene nanoplatelets Jurnal International Journal of Biological Macromolecules vol. 58 : 1– 6

Emma, Tucker. (2016). Micaella Pedros uses heat-shrunk plastic bottles to join furniture. diperoleh tanggal 19 Januari 2017 dari https://www.dezeen.com/2016/06/3 0/micaella-pedros-royal-college-of- art-graduate-showrca-joining- bottles-wood-furniture-recycled- plastic/

Ervianto, W. I. (2012). Selamatkan Bumi melalui Konstruksi Hijau. Yogyakarta: Penerbit Andi.

Mahenya, Bambang. (2008). Penggunaan Limbah Botol Plastik PET sebagai Campuran Beton untuk Meningkatkan KapasitasTarik dan Geser. Perpustakaan Universitas Indonesia

Pedros, Micaella (2017). Joinning Bottles. diperoleh tanggal 4 Juni 2017 dari https://www.instagram.com/p/BRB Qh5EA7QJ/

Ramadhan, Gilang. (2010).

Pemanfaatan Limbah Kayu Untuk Perancangan Casing Produk Information Technology Dengan Pendekatan Konsep Retro. Hasil study lapangan. Jawa Timur

Salmandia. (2014). Potensi dan Pemanfaatan Limbah Serbuk Kayu. diperoleh tanggal 23 Januari 2017 dari http://kayuserbuk.wordpress.com Standar Nasional Indonesia. (1994).

SNI 03-3399-1994: Metode Pengujian Kuat Tarik Kayu di Laboratorium. Badan Standarisasi Nasional Standar Nasional Indonesia (2002).

SNI- 03-6850-2002: Metode Pengukuran Kadar Air Kayu dan Bahan Berkayu. Badan Standarisasi Nasional

Sumarni, Sri. (2010). Struktur Kayu. Surakarta: Yuma Pustaka

Turku I et al. (2017). Characterization of wood plastic composites manufactured from recycled plastic blends. Jurnal Composite Structures Vol.161 : 469–476

Wahyudi, dkk. (2014). Karakteristik dan Sifat-Sifat Dasar Kayu Jati Unggul Umur 4 dan 5 Tahun Asal Jawa Barat Jurnal Ilmu Pertanian

. Indonesia (JIPI), Vol. 19 (1): 50 56

Yani, Ahmad (2013). Keteguhan Sambungan Kayu Resak (Vatica rassak BI) Berdasarkan Bentuk Sambungan dan Jumlah Paku . rnal vokasi Vol. 9 (1): 51-60




DOI: https://doi.org/10.20961/ijcee.v3i1.22422

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Indonesian Journal Of Civil Engineering Education



Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.