Pengoptimalan Fungsi Magnetik dan Sistem Hidrolik pada Alat Penyangga Mesin Mobil dalam Menerapkan Budaya K3 di Dunia Industri Otomotif

Zanuri Kristanto, Muhamad Andito Yogatama, Linda Widyawati, Alyna Kirana Dewi, Fauziyah Nur Lathifah, Danar Susilo Wijayanto

Abstract


Speed and accuracy of workmanship are important supporting factors for business actors operating in the service sector. The availability of adequate supporting equipment can increase work productivity and can reduce the risk of work accidents that can endanger the surrounding environment. Technological developments in the automotive industry always provide innovations. Even though it is like that, it still doesn't escape the new problems that accompany it. In the process of replacing a car clutch lining, the application of knowledge about lifting aircraft is very necessary. Differences in the load capacity of car engines that exceed human strength capacity require the use of tools according to specifications. The addition of a hydraulic system to the machine support can provide lifting power that is greater than the power produced by mechanics in lifting or holding loads that exceed their capacity. Apart from that, implementing a culture of occupational health and safety is important to realize workforce welfare. What is not expected when repairing a car's clutch lining is a shift in the load support of the car's engine which can cause damage to other components and can even endanger mechanical safety. The property of magnets that can attract metal objects can be used to improve K3 in the automotive industry as an effort to prevent engine supports from shifting position when repairs are carried out on car clutch linings.

Keywords


Engine Holder, Magnetism, Hydraulic, K3

Full Text:

PDF
rticle

References


Carrera, M. A., Sánchez, L. M., Morales, M. M., Fernández-Alba, A. R., & Hernando, M. D. (2024). Method optimisation for large scope pesticide multiresidue analysis in bee pollen: A pilot monitoring study. Food Chemistry, 436(October 2023). https://doi.org/10.1016/j.foodchem.2023.137652

Chen, B., Barboza, B. R., Sun, Y., Bai, J., Thomas, H. R., Dutko, M., Cottrell, M., & Li, C. (2022). A Review of Hydraulic Fracturing Simulation. In Archives of Computational Methods in Engineering (Vol. 29, Issue 4). Springer Netherlands. https://doi.org/10.1007/s11831-021-09653-z

Chen, W., Yan, Z., & Wang, L. (2020). On mechanics of functionally graded hard-magnetic soft beams. International Journal of Engineering Science, 157, 103391. https://doi.org/10.1016/j.ijengsci.2020.103391

Delvika, Y., & Mustafa, K. (2019). Evaluate the Implementation of Occupational Health and Safety (OHS) Management System Performance Measurement at PT. XYZ Medan to minimize Extreme Risks. IOP Conference Series: Materials Science and Engineering, 505(1). https://doi.org/10.1088/1757-899X/505/1/012028

Dilshod, B., Markova, I., Sultanov, S., Kattakulov, F., & Baymanov, R. (2021). Dynamics of the hydraulic and alluvial regime of the lower reaches of the Amudarya after the commissioning of the Takhiatash and Tuyamuyun hydrosystems. IOP Conference Series: Materials Science and Engineering, 1030(1). https://doi.org/10.1088/1757-899X/1030/1/012110

Fatxulloyev, A., Allayorov, D., & Otakhonov, M. (2020). Study of hydraulic parameters for concreting channels. IOP Conference Series: Earth and Environmental Science, 614(1). https://doi.org/10.1088/1755-1315/614/1/012054

Fauziyah, S., Susanti, R., & Nurjihad, F. (2021). Risk assessment for occupational health and safety of Soekarno-Hatta international airport accessibility project through HIRARC method. IOP Conference Series: Earth and Environmental Science, 700(1). https://doi.org/10.1088/1755-1315/700/1/012048

Huang, W., Liu, M., & Hsia, K. J. (2023). A discrete model for the geometrically nonlinear mechanics of hard-magnetic slender structures. Extreme Mechanics Letters, 59, 101977. https://doi.org/10.1016/j.eml.2023.101977

Klimova, E. V., Semeykin, A. Y., & Nosatova, E. A. (2018). Improvement of processes of professional risk assessment and management in occupational health and safety system. IOP Conference Series: Materials Science and Engineering, 451(1). https://doi.org/10.1088/1757-899X/451/1/012198

Kumar, L., Alone, D. B., & Pradeep, A. M. (2023). Influence of an upstream transonic axial compressor stage on the performance of inter-stage duct. Journal of Mechanical Science and Technology, 37(5), 2179–2185. https://doi.org/10.1007/s12206-023-2105-y

Liu, Y., Li, W., Lin, S., Zhou, X., & Ge, Y. (2023). Hydraulic system fault diagnosis of the chain jacks based on multi-source data fusion. Measurement: Journal of the International Measurement Confederation, 217(June), 113116. https://doi.org/10.1016/j.measurement.2023.113116

Maksimova, A. N., Rudnev, I. A., Kashurnikov, V. A., & Moroz, A. N. (2022). Levitation Forces Acting on an HTS Sample in the Field of a Permanent Magnet. Journal of Superconductivity and Novel Magnetism, 35(11), 3093–3100. https://doi.org/10.1007/s10948-022-06400-8

Mínguez Espallargas, G., & Coronado, E. (2018). Magnetic functionalities in MOFs: From the framework to the pore. Chemical Society Reviews, 47(2), 533–557. https://doi.org/10.1039/c7cs00653e

Mohanty, S., & Paul, S. (2023). A frame work for comparative wear based failure analysis of CNG and diesel operated engines. Energy, 269(January), 126675. https://doi.org/10.1016/j.energy.2023.126675

Mukherjee, D., Rambausek, M., & Danas, K. (2021). An explicit dissipative model for isotropic hard magnetorheological elastomers. Journal of the Mechanics and Physics of Solids, 151(January), 104361. https://doi.org/10.1016/j.jmps.2021.104361

Purwanto, A., Kurnia Hadi, Y., Zaenal Abidin, R., Febri Prabowo, R., & Julyanto, O. (2020). Exploring Impect of Occupational Health and Safety Iso 45001 Implementation on Employee Performance: Evidence From Indonesian Industries. Journal of Critical Reviews, 7(15), 2007–2015.

Putri, D. O., Triatmanto, B., & Setiyadi, S. (2018). The effect of occupational health and safety, work environment and discipline on employee performance in a consumer goods company. IOP Conference Series: Materials Science and Engineering, 337(1). https://doi.org/10.1088/1757-899X/337/1/012036

Rajan, A., & Arockiarajan, A. (2021). Bending of hard-magnetic soft beams: A finite elasticity approach with anticlastic bending. European Journal of Mechanics, A/Solids, 90(July), 104374. https://doi.org/10.1016/j.euromechsol.2021.104374

Sarraf, M., Kataria, S., Taimourya, H., Santos, L. O., Menegatti, R. D., Jain, M., Ihtisham, M., & Liu, S. (2020). Magnetic field (MF) applications in plants: An overview. Plants, 9(9), 1–17. https://doi.org/10.3390/plants9091139

Syaiful, Sinaga, N., Yunianto, B., & Tony Suryo Utomo, M. S. K. (2019). Comparison of Thermal-Hidraulic Performances of Vortex Generators Mounted on Heated Plate: Experimental Study and Flow Visualization. IOP Conference Series: Materials Science and Engineering, 494(1). https://doi.org/10.1088/1757-899X/494/1/012011

Uralov, B., Rakhmatov, N., Khidirov, S., Safarov, G., Uljaev, F., & Raimova, I. (2021). Hydraulic modes of damless water intake. IOP Conference Series: Materials Science and Engineering, 1030(1). https://doi.org/10.1088/1757-899X/1030/1/012123

Xing, Z., & Yong, H. (2023). Numerical study on the instabilities of hard-magnetic soft materials with viscoelastic effects. Mechanics of Materials, 179(November 2022), 104602. https://doi.org/10.1016/j.mechmat.2023.104602




DOI: https://doi.org/10.20961/dedikasi.v6i1.80479

Refbacks

  • There are currently no refbacks.


DEDIKASI: Community Service Reports 
Online ISSN: 2715-5706
Website: https://jurnal.uns.ac.id/dedikasi
Email: salimi@staff.uns.ac.id
Published by: Universitas Sebelas Maret
Ir. Sutami Street, No. 36A, Surakarta, Jawa Tengah 57126- Phone 0271-642595