3.png){kind=logo}
1.png)
Pendampingan Industri Kecil Pengecoran Logam Ceper Untuk Meningkatkan Kemandirian Pasokan Peralatan Tambang
Abstract
Developing substitution products for mining equipment parts in local industries will have a significant economic impact. In addition, it will create independence in the supply of mining components, not relying on imports. However, Ceper metal casting area is still using traditional methods. This community service aims to improve product design and skills to support the supply chain availability of consumable mining equipment parts. Designing from existing components is not easy for small industries; therefore, it needs assistance from university experts. The method used design assistance in the production of bucket-adapter consumable parts. The mechanical engineering study program team assists with three stages of the process: (1) scanning, (2) triangulation, and (3) CAD modeling. The results showed that consumable parts had been successfully submitted to an industry partner to proceed to the following stages: (4) CAM and (5) machining. The consumable parts design improves quality and independence in manufacturing mining equipment parts. The local industry appreciated this activity because a good design can improve the process of developing consumable mining equipment parts.
Keywords
Full Text:
PDFReferences
Budiwantoro, B., & Suweca, I. W. (2016). Perancangan Ulang Rumah Z-Peller Studi Kasus Rekayasa Balik. Repository.Polman-Bandung.Ac.Id, 4–7. http://repository.polman-bandung.ac.id/file_publikasi/339677103_Kurniawan_Perancangan Ulang Rumah Z-Peller.pdf
Chua, C. K., Leong, K. F., & Lim, C. S. (2003). Rapid Prototyping, Priciples and Applications (2nd ed.). World Scientific.
Ciocǎnea, A., Nicolaie, S., & Bǎbuţanu, C. (2017). Reverse Engineering for the Rotor Blades of a Horizontal Axis Micro-hydrokinetic Turbine. Energy Procedia, 112(October 2016), 35–42. https://doi.org/10.1016/j.egypro.2017.03.1056
Kementerian Perindustrian. (2016). IKM di Ceper Dikembangkan Jadi Sektor Unggulan Pengecoran Logam. https://kemenperin.go.id/artikel/16587/IKM-di-Ceper-Dikembangkan-Jadi-Sektor-Unggulan-Pengecoran-Logam
Kementerian Perindustrian. (2017). Kunjungan Kerja Dirjen KPAII Kemenperin di Solo dan Ceper. https://kemenperin.go.id/artikel/17003/Kunjungan-Kerja-Dirjen-KPAII-Kemenperin-di-Solo-dan-Ceper-
Kementrian Perindustrian. (2022). Kemenperin Ajak Pelaku Industri Tingkatkan TKDN dan Sukseskan Substitusi Impor. https://kemenperin.go.id/artikel/23070/Kemenperin-Ajak-Pelaku-Industri-Tingkatkan-TKDN-dan-Sukseskan-Substitusi-Impor
Mora, S. M., Gil, J. C., & López, A. M. C. (2019). Influence of manufacturing parameters in the dimensional characteristics of ABS parts obtained by FDM using reverse engineering techniques. Procedia Manufacturing, 41, 968–975. https://doi.org/10.1016/j.promfg.2019.10.022
Presiden RI. (2008). UNDANG-UNDANG REPUBLIK INDONESIA NOMOR 20 TAHUN 2008 TENTANG USAHA MIKRO, KECIL, DAN MENENGAH.
Sitindaon, P., Simanjuntak, J. G., & Pardosi, H. (2018). Rekayasa Nickel Chromium Molybdenum Steel (Scn Cr M2) Sebagai Material Screw Press Kelapa Sawit Dengan Teknik Pengecoran Logam Dan Heat Treatment Untuk Peningkatan Konsistensi Masa Pakai. Jurnal Teknik Dan Teknologi, 13(25), 1–9.
Várady, T., Martin, R. R., & Cox, J. (1997). Reverse engineering of geometric models - An introduction. CAD Computer Aided Design, 29(4), 255–268. https://doi.org/10.1016/s0010-4485(96)00054-1
Vijaya Ramnath, B., Elanchezhian, C., Jeykrishnan, J., Ragavendar, R., Rakesh, P. K., Dhamodar, J. S., & Danasekar, A. (2018). Implementation of Reverse Engineering for Crankshaft Manufacturing Industry. Materials Today: Proceedings, 5(1), 994–999. https://doi.org/10.1016/j.matpr.2017.11.175
DOI: https://doi.org/10.20961/dedikasi.v4i2.56182
Refbacks
- There are currently no refbacks.
|
