ANALISIS RISIKO DAN PENGENDALIAN BAHAYA BENGKEL PEMESINAN DI SMKS PANCASILA SURAKARTA

Irvan Bayu Widyasmoro, Lutfi Ilunsa Zain, Joko Pamiyanto, Malikul Misbah, Muh fuad Adi Dwi cahyanto, Muhammad Agus Ma’ruf, Suwarta Suwarta, Danar Susilo Wijayanto, Valiant Lukad Perdana Sutrisno

Abstract

This research aims to carry out an in-depth analysis regarding risks and work safety control efforts at the SMKS Pancasila Surakarta Machining Workshop, by applying the Job Safety Analysis (JSA) method. In the direct observation process, a number of potential risks have been identified, including aspects of lighting that are less than optimal, equipment storage management that is not yet fully efficient, conditions of supporting facilities that need to be improved, and a lack of awareness regarding Occupational Safety and Health (K3). This risk analysis then paves the way for the development of control measures that focus on improving lighting, better equipment storage arrangements, strategic placement of supporting facilities, installation of stabilizers on machines, and expanding K3 awareness through industrial work culture. It is hoped that these recommendations can make a significant contribution in creating a learning environment that is not only safe and comfortable, but also more productive for students and teaching staff in vocational school machining workshops. Thus, this research not only illustrates an in-depth understanding of risks in SMK machining workshops, but also offers concrete solutions to improve overall work safety conditions.

Keywords

Occupational Safety and Health (K3), Safety Risks, Industrial Work Culture, Vocational Schools

Full Text:

PDF

References

Cahya, M. V., & Yunus. (2021). Manajemen Sarana Dan Prasarana Dalam Meningkatkan Mutu Pendidikan Pada Program Keahlian Teknik Pemesinan Di Smk Negeri 3 Surabaya. Jptm, 11, 62–68. Hati, S. W. (2015). Analisis Keselamatan dan Kesehatan Kerja (K3) pada Pembelajaran di Laboratorium Program Studi Teknik Mesin Politeknik Negeri Batam. Journal of Chemical Information and Modeling, 53(9), 1689–1699. Ilmansyah, Y., Mahbubah, N. A., & Widyaningrum, D. (2021). PENERAPAN JOB SAFETY ANALYSIS SEBAGAI UPAYA PENCEGAHAN KECELAKAAN KERJA DAN PERBAIKAN KESELAMATAN KERJA DI PT SHELL INDONESIA. Profisiensi, 8(1). Khamdani, I., Dardi, E., & Rohman, R. (2019). Analisis Risiko Bahaya Dan Persepsi Mahasiswa Terhadap Penerapan K3Di Bengkel Pemesinan Progam Studi Pendidikan Teknik Mesinjptk Fkip Universitas Sebelas Maret Surakarta. Journal of Chemical Information and Modeling, 53(9), 1689–1699. Muhammad Zulfi Ikhsan. (2022). Identifikasi Bahaya, Risiko Kecelakaan Kerja Dan Usulan Perbaikan Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi Dan Manajemen Industri Terapan, 1(I), 42–52. https://doi.org/10.55826/tmit.v1ii.13 Namariq, M. K., & Hargiyarto, P. (2016). Analisis Risiko dan Pengendalian Bahaya Bengkel Pemesinan SMKN 2 Depok Sleman Yogyakarta. Jurnal Pendidikan Vokasional Teknik Mesin, 4(2), 69–78. Pangeran, M. W., Kustono, D., & Tuwoso. (2016). Faktor Yang Mempengaruhi Penerapan K3 di Bengkel Pemesinan. Jurnal Pendidikan Sains, 4(3), 90–94. Prasasti, A. A., Ernawati, M., & Fatah, M. Z. (2023). Analisis Intensitas Cahaya Pada Area Kerja Machining Berdasarkan Standar Pencahayaan. Journal of Industrial Hygiene and Occupational Health, 8(1), 77–88. https://doi.org/10.21111/jihoh.v8i1.10116 Purwanto, & Sukardi, T. (2015). Pengelolaan Bengkel Praktik Smk Teknik Pemesinan Di Kabupaten Purworejo. Jurnal Pendidikan Teknologi Dan Kejuruan, 22(3), 291. https://doi.org/10.21831/jptk.v22i3.6836 Qodri, M. S. (2019). OPTIMALISASI PEMANFAATAN PERALATAN BENGKEL PEMESINAN JURUSAN TEKNIK PEMESINAN (TPM) DI SMKN 1 SARIREJO LAMONGAN. JPTM, 09(1), 68–76. Sani, G. M., Priyana, E. D., & Rizqi, A. W. (2022). Identifikasi Dan Analisis Risiko Kecelakaan Kerja Dengan Metode Jsa ( Job Safety Analysis ) Di Bengkel Pemesinan Smk Nurul Islam Gresik. SITEKIN: Jurnal Sains, Teknologi Dan Industri, 20(1), 300–307.

Refbacks

  • There are currently no refbacks.