UJI EKSPERIMENTAL EFISIENSI TERMAL SERPENTINE SOLAR WATER HEATER DENGAN LAJU ALIRAN AIR 1 LPM

Yustisia Ahnaf, Nugroho Agung Pambudi, Husin Bugis

Abstract

Solar water heater is a device that uses solar collectors to absorb solar radiation and convert it into heat energy to heat water. The type of solar collector and the water flow rate used affect the thermal efficiency of the solar water heater. This research uses a solar water heater with a serpentine configuration of copper pipe material and applies a water flow rate of 1 lpm. The purpose of this research is to determine the effect of water flow rate on the thermal efficiency produced by solar water heater with serpentine configuration. The type of research is quantitative research, with experimental methods. This research was conducted at Campus V, Sebelas Maret University Surakarta for 3 days starting at 09.00 to 15.00 WIB. The test results of the serpentine solar water heater with a water flow rate of 1 lpm produced the highest temperature reaching 43.42 ͦC and had a thermal efficiency of 46.14%.

Keywords

Solar Energi, Solar Water Heater, Water Flow Rate, Serpentine Configuration

Full Text:

PDF PDF

References

Faisal Afif, & Awaludin Martin. (2022). Tinjauan Potensi dan Kebijakan Energi Surya di Indonesia. Jurnal Engine: Energi, Manufaktur, Dan Material, 6(1), 43–52. Franco, A. (2020). Methods for the sustainable design of solar energy systems for industrial process heat. Sustainability (Switzerland), 12(5), 5127. https://doi.org/10.3390/su12125127 Kabir, E., Kumar, P., Kumar, S., Adelodun, A. A., & Kim, K. H. (2018). Solar energy: Potential and future prospects. Renewable and Sustainable Energy Reviews, 82(9), 894–900. https://doi.org/10.1016/j.rser.2017.09.094 Khammayom, N., Maruyama, N., Chaichana, C., & Hirota, M. (2023). Experimental analysis of local air temperature and thermal performance of a serpentine copper pipe. Energy Reports, 9(10), 653–661. https://doi.org/10.1016/j.egyr.2022.11.044 Mahadi, M. S. U. R., Hasan, M. F., Ahammed, A., Kibria, M. T., & Huque, S. (2014). Construction, fabrication and performance analysis of an indigenously built serpentine type thermosyphon solar water heater. Proceedings of 2014 3rd International Conference on the Developments in Renewable Energy Technology, ICDRET 2014, 5, 1–6. https://doi.org/10.1109/icdret.2014.6861712 Nazari, M., Jafarmadar, S., & Khalilarya, S. (2022). Exergy and thermoeconomic analyses of serpentine tube flat-plate solar water heaters coated with CuO nanostructures. Case Studies in Thermal Engineering, 35(5), 102072. https://doi.org/10.1016/j.csite.2022.102072 Pambudi, N. A., Nanda, I. R., & Saputro, A. D. (2023). Results in Engineering The energy efficiency of a modified v-corrugated zinc collector on the performance of solar water heater ( SWH ). Results in Engineering, 18(March), 101174. https://doi.org/10.1016/j.rineng.2023.101174 Sadhishkumar, S., & Balusamy, T. (2014). Performance improvement in solar water heating systems - A review. Renewable and Sustainable Energy Reviews, 37(4), 191–198. https://doi.org/10.1016/j.rser.2014.04.072 Shahsavar, A. (2021). Experimental evaluation of energy and exergy performance of a nanofluid-based photovoltaic/thermal system equipped with a sheet-and-sinusoidal serpentine tube collector. Journal of Cleaner Production, 287(11), 125064. https://doi.org/10.1016/j.jclepro.2020.125064 Susanto, H., & Irawan, D. (2017). Pengaruh Jarak Antar Pipa Pada Kolektor Terhadap Panas Yang Dihasilkan Solar Water Heater (Swh). Turbo : Jurnal Program Studi Teknik Mesin, 6(1), 84–91. https://doi.org/10.24127/trb.v6i1.470 Xu, W., Song, W., & Ma, C. (2020). Performance of a water-circulating solar heat collection and release system for greenhouse heating using an indoor collector constructed of hollow polycarbonate sheets. Journal of Cleaner Production, 253(12), 119918. https://doi.org/10.1016/j.jclepro.2019.119918

DOI: https://doi.org/10.20961/nozel.v5i2.75815

Refbacks

  • There are currently no refbacks.