Usage of Phase Change Material as Heat Storage in Water Desalination

Leony Serenauli Pandjaitan, Muhamad Dwi Septiyanto, Syamsul Hadi

Abstract

Phase Change Material (PCM) refers to substances that can absorb or release heat, making them effective for heat storage applications. PCMs can be categorized by chemical composition into three primary types: organic, inorganic, and eutectic. In Indonesia, a nation characterized by extended periods of sun exposure, selecting the most suitable PCM for solar still desalination experiments poses a challenge in reducing inefficient practical outcomes. This study investigates the properties of various PCMs and analyzes the essential factors to consider when choosing a PCM for heat storage. The research employs a review method using previously published literature from the Scopus database that incorporates PCM in solar still desalination. The results highlight five critical parameters for evaluation: physical properties, chemical properties, thermal properties, kinetic properties, and economic cost. For optimal compatibility with tropical environments, paraffin wax and soybean wax are the most appropriate choices, whereas coconut oil and beef tallow, which melt faster than wax, are better suited for subtropical regions.

Full Text:

PDF

References

A. Anand, K. Kant, A. Shukla and A. Sharma, “Latent Heat Storage for Solar Still Application,” in Solar Desalination Technology, Delhi, Springer Nature Singapore Ltd., 2019, pp. 293-323. D. Curto, V. Franzitta and A. Guercio, “A Review of the water Desalination Technologies,” Applied Science, 2021. S. Ali and S. P. Deshmukh, “An Overview: Application of Thermal Energy Storage Using Phase Change Material in Direct Solar Desalination: A State of Art review,” Renewable and Sustainable Energy Reviews, vol. 186, 2023. V. Tiwari and P. Srinivasan, “SWOT Analyses of High-Temperature Phase Change Materials for Thermal Energy Storage,” Materials Today: Proceedings, vol. 28, no. 2, pp. 949-954, 2020. J. Kateshia and V. Lakhera, “A Comparative Study of Varrious fatty Acid as Phase Change Material to Enchance The Freshwater Productivity of Solar Still,” Journal of Energy Storage, vol. 48, 2022. K. Deore, N. P. Salunke and B. S. Pawar, “Phase Change Materials (PCMs) in Solar Still: - A Review to Improve Productivity of Still,” Materials Today: Proceeding. I. Shamseddine, F. Pennec, P. Biwole and F. Fardoun, “Supercooling of Phase Change Materials: A Review,” Renewable and Sustaible Energy Reviews, vol. 158, 2022. V. V. Tyagi and A. K. Pandey, “A Comprehensive Review on Phase Change Materials for Heat Storage Applications: Development, Characterization, Thermal and Chemical Stability,” Solar Energy Materials and Solar Cells, vol. 234, 2022. V. S. Vigneswaran and G. Kumaresan, “Augmenting the Productivity of Solar Still Using Multiple PCMs as Heat Energy Storage,” Journal of Energy Storage, vol. 26, 2019. N. V., M. G and A. K. Bewoor, “Experimental Study on Performance of Single Slope Solar Still Integerated with Sand Troughs,” Sustainable Energy Technologies and Assessments, vol. 50, 2023. S. Tiwari, C. Mall and P. P. Solanki, “Surfactant and its applications: A review,” International Journal of Engineering Research and Application, vol. 8, no. 9, pp. 61-66, 2018. S. Sundeep and N. S. e. al., “Triangular and Single Slope Solar Stills: Performance and Yield Studies with Different Water Mass,” in 7th International Conferfence on Advances on Clean Energy Research, ICACER 2022, Barcelona, 2022. S. Shoeibi, H. Khargarsharifabad and N. Rahbar, “Effects of nano-enhanced phase change material and nano-coated on the Performance on Solar Still,” Journal of Energy Storage, vol. 42, 2021. H. Samuel, “Improving the yield of fresh water in conventional solar still using low cost energy storage material,” Energy Conversion and Management, vol. 112, pp. 125-134, 2016. A. d. N. S. K. Sampathkumar, “Experimental Investigation on Productivity Enchancement in Single Slope Solar Still Using Borassus Flabellifer Micro-sized Particles,” Materials Letters, vol. 299, 2021. A. Sampathkumar and S. K. Natarajan, “Experimental Analysis On Single Slope Solar Still by The Inclusion of Agar-Agar (Eucheuma) Fibre and Micro Phase Change Material for The Productivity Enhancement,” Journal of Energy Storage, vol. 50, 2022. h. Saleem, “Qatar Desalination Research: An Overview,” Desalination, vol. 564, no. 116802, p. 1, 2023. D. D. W. Rufuss, L. Suganthi, S. Iniyan and P. A. Davies, “Effects of nanoparticle-enhanced phase change material (NPCM) on Solar Still Productivity,” Journal of Cleaner Production, vol. 192, 2018. R. Ravotti, O. Fellmann, N. Lardon, J. L. Fischer, A. Stamatiou and J. Worlitschek, “Analysis of Bio-Based Fatty Esters PCM’s Thermal Properties and Investigation of Trends in relation to Chemical Structures,” Applied Science, vol. 9, no. 225, 2019. A. R. e. a. Prasad, “Investigating single sloped (SSl) and square pyramid (SPy) solar stills using PCM,” Materials Today: Proceeding, 2023. K. P.M., “Experimental Investigation on the Performance of a Single Slope Solar Still with Thermal Energy Storage,” Materials Today: Proceedings. H. Mousa, “Modeling and Analysis the Productivity of Solar Desalination Units with Phase Change Material,” Renewable Energy, vol. 95, pp. 225-232, 2016. H. Mousa, J. Naser, A. Gujarathi and S. Al-Sawafi, “Experimental Study and Analysis of Solar Still Desalination Using Phase Change Materials,” Journal of Energy Storage, vol. 26, 2019. A. M. Manokar, K. K. Murugavel and G. Esakkimuthu, “Different Parameters Affecting the Rate of Evaporation and Condensation on Passive Solar Still,” Renewable and Sustainable Energy Reviews, vol. 38, pp. 309-322, 2024. P. Manoj Kumar, D. Sudarvizhi, K. Prakash, A. Aunpradeepa, R. S. Boomiha and S. Shanmathi, “Investigating a Single Slope Solar Still with a Nano-Phase Change Material,” Materials Today Proceeding, 2021. A. Lawrence, “Influence of Nickel Oxide Nanoparticles on the Absorption Enchancement of Solar Radiation for Effective Distillation by SIngle Slope Wick-Type Solar Still,” Materials Today: Proceedings, vol. 45, 2021. V. P. Katekar and S. S. Deshmukh, “A Review on Research Trends in Solar Still Designs for Domestic and Industrial Application,” Journal of Cleaner Production, vol. 257, 2020. B. Janarthanan and S. Sagadevan, “Thermal Energy Storage using Phase Change Materials and Their Applications: A Review,” International Journal of ChemTech Research, vol. 8, no. 6, pp. 250-256, 2015. M. Jahanpanah, S. Sadatinejad, A. Kasaeian, M. Jahangir and H. Sarrafha, “Experimental Investigation of the Effects of Low-temperature Phase Change Material on Single Slope Solar Still,” Desalination, vol. 499, 2021. L. Huang, E. Günther, C. Doetsch and Mehling Harald, “Subcooling in PCM Emulsion-Part 1: Experimental,” Thermochimica Acta, vol. 509, pp. 93-99, 2010. F. A. Hammad, “Investigating Design of a Dome-shaped Solar Distiller Enchanced with a Multi-tray Conical Absorber Basin and Fountain Feeding Supply: Experimental Study with Energy, Exergy, and Enviromental,” Solar Energy, vol. 266, 2023. H. G. Hameed, “A Numerical Investigation of the Enchancement of Single Slope Single-basin Solar Still Productivity,” Energy Reports, vol. 9, pp. 484-500, 2023. D. Haillot, S. Pincemin, V. Goetz, D. R. Rouse and X. Py, “Synthesis and Characterization of Multifunctional Energy Composite: Solar Absorber and Latent Heat Storage Material of High Thermal Conductivity,” Solar Energy Materials & Solar Cells, vol. 161, pp. 270-277, 2017. H. Hafs, “Numerical Simulation of the Performance of Passive and Active Solar Still with Corrugated Absorber Surface as Heat Storage Medium for Sustainable Solar Desalination Technology,” Groundwater for Sustainable Development, vol. 14, May 2021. Z. M. Ghazi and S. J. Zaidi, “An Overview of Water Dealination Systems Intergrated With Renewable Energu Sources,” Desalination, vol. 542, no. 116063, August 2022. M. Gaur and G. Tiwari, “Optimization of Number of Collectors for Integrated PV/T Hybrid Active Solar Still,” Applied Energy, vol. 87, 2010. M. H. Esfe and D. Toghraie, “Numerical Investigation of WInd Velocity Effects on Evaporation rate of Passive SIngle-slope Solar Stills in Khuzestan Provincec in Iran,” Alexandria Engineering Journal, vol. 62, pp. 145-156, July 2023. A. A. El-Sebaii, A. A. Al-Ghamdi, F. S. Al-Hazmi and A. S. Faidah, “Thermal Performance of a Single Basin Solar Still With PCM as a Storage Medium,” Applied Energy, vol. 87, pp. 1187-1195, 2009. S. Dhasan and R. Sathyamurthy, “Performance Analysis on Single Slope Solar Still with Absorber Coated Using Iron Oxide Nanoparticles at Different Water Thickness,” Solar Energy, vol. 264, no. 112083, Ocotber 2023. B. S. E. D., “The Use of Passive Baffles to Increase the Yield of a Single Slope Solar Still,” Solar Energy, vol. 226, pp. 297-308, August 2021. Y. A. Cengel, “Basic Heat Transfer,” in Heat Transfer: A Practical Approach, 2nd ed., New York, McGraw-Hill, 2002. O. Badran, “Experimental Study of the Enchancement Parameters on a Single Slope Solar Still Productivity,” vol. 209, pp. 136-143, 2007. M. Ashouri, F. R. Astaraei, R. Ghasempour, M. H. Ahmadi and M. Feidt, “Optimum Insulation Thickness Determination of a building wall using Exergetic Life Cycle Assessment,” Applied Thermal Engineering, vol. 106, pp. 307-315, 2016. H. M. Ali, F. Hassan and F. Jamil, “Recent Advancements in Laten Heat phase Change Materials and Their Applications for Thermal Energy Storage and Buildings: A State of Art Review,” Sustainable Energy Technologies and Assessments, vol. 49, no. 101646, 2022. W. H. e. a. Alawee, “Testing a Single Slope Solar Still with Copper Heating Coil, External Condenser, and Phase Change Material,” Journal of Energy Storage, vol. 56, 2022. A. Agrawal, “Heat Transfer Coefficients and Productivity of a Single Slope Single Basin Solar Still in Indian Climatic Condition: Experimental and Theoritical Comparison,” Resource-Efficient Technologies, vol. 3, pp. 466-482, 2017. L. O. Afolabi, C. C. Enweremadu, M. W. Kareem, A. I. Arogundade, K. Irshad, I. Saiful, K. O. Oladosu, A. M. Elfaghi and D. H. Didane, “Experimental investigation of double slope solar still integrated with PCM Nanoadditives Microencapsulated Thermal Energy Storage,” Desalination, vol. 553, 2023. I. Dinc¸er and M. A. Rosen, “Recent Advances In TES: Methods, Technologies, and Application,” in Thermal Energy Storage: Systems and Applications, 2nd Edition, Canada, A John Wiley and Sons, Ltd., 2011, pp. 483-512. J. R. Welty, C. E. Wicks, R. E. Wilson and G. L. Rorrer, Fundamentals of Momentum, Heat, and Mass Transfer, New York: Wiley, 2007.

DOI: https://doi.org/10.20961/mekanika.v25i1.90218

Refbacks

  • There are currently no refbacks.