Experimental Studies of Twist Ratio Effect to The Heat Transfer Enhancement Using Square Cut Tape and Classical Tape Insert

Alfan Adha Hutama Putra, Agung Tri Wijayanta, Indri Yaningsih

Abstract

EXPERIMENTAL STUDIES OF TWIST RATIO EFFECT TO THE HEAT TRANSFER ENHANCEMENT USING SQUARE CUT TAPE AND CLASSICAL TAPE INSERT

Full Text:

PDF

References

A. E. Bergles, 1985, “Techniques to Augment Heat Transfer,” In : W. M. Rohsenow, J. P. Hartnett, E. Ganie, Handbook of Heat

Transfer Application, McGraw-Hill, New York, 1985.

Y. A. Cengel, J. M. Cimbala, “Fluid Mechanics: Fundamental and Applications 1st edition,” McGraw–Hill, New York, 2006.

J. P. Holman, “Heat Transfer 10th ed.,” McGraw–Hill, New York, 2010.

A. S. Lavine, F. Incropera, and D. De Witt, “Fundamentals of Heat and Mass Transfer,” John Wiley & Sons; 6th edition, 2006.

F. Kreith, R. Manglik, and M. Bohn, “Principles of Heat Transfer,” Cengage learning, 2010.

R. M. Manglik and A. E. Bergles, “Heat Transfer Enhancement and Pressure Drop in Viscous Liquid Flows in Isothermal Tubes with Twisted-Tape Inserts,” Wärme-und Stoffübertragung, vol. 27, no. 4, pp. 249-257, 1992.

P. Murugesan, K. Mayilsamy, and S. Suresh, “Turbulent Heat Transfer and Pressure Drop in Tube Fitted with Square-Cut Twisted Tape,” Chinese J. of Chemical Eng., vol. 18, no. 4, pp. 609-617, 2010.

P. Murugesan, K. Mayilsamy, and S. Suresh, “ Heat Transfer and Friction Factor in a Tube Equipped with U-Cut Twisted Tape Insert,” Jordan J. of Mech. and Ind. Eng., vol. 5, pp. 559-565, 2011.

P. Murugesan, K. Mayilsamy, S. Suresh, and P. Srinivasan, “Heat Transfer and Pressure Drop Characteristics of Turbulent Flow in a Tube Fitted with Trapezoidal-Cut Twisted Tape Insert,” Int. J. of academic research, vol. 1, no. 1, 2009.

Pratik P. Ganorkar, R.M. Warkhedkar, “Heat Transfer Enhancement in a Tube Using Elliptical-Cut Twisted Tape Inserts,” Int. J. of Mech. Eng., vol. 2, 2015.

I. Quazi and V. Mohite, 2015, “Heat Transfer Enhancement in a Heat Exchanger Using Punched and V-Cut Twisted Tape Inserts,” 2015.

K. P. Suresh, K. Raju, P. Mahanta, and A. Dewan, “Review of Passive Heat Transfer Augmentation Techniques,” Proceedings of the Institution of Mechanical Engineers (I-Mech-E) Part A, Journal of Power and Energy, vol. 218, no. 7, pp. 509-527, 2005.

B. Petukhov, “Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties,” Advances in heat transfer, vol. 6 no. 503, pp. 1565, 1970.

B. Salam, S. Biswas, S. Saha, and M. M. K. Bhuiya, “Heat Transfer Enhancement in a Tube Using Rectangular-Cut Twisted Tape Insert,” Procedia Engineering, vol. 56, pp. 96-103, 2013.

F.M. White, “Fluid Mechanics,” McGraw-Hill, 2003.

A. C. Yunus, 2003, “Heat Transfer: A Practical Approach,” MacGraw Hill, New York, Vol, 2003.

DOI: https://doi.org/10.20961/mekanika.v16i2.35055

Refbacks

  • There are currently no refbacks.