ANALISIS BIAYA DAN WAKTU PEMBANGUNAN GEDUNG FPEB UPI MENGGUNAKAN SISTEM MODULAR PADA DINDING

Ary Setyawan, Friska Herlina Pakpahan, Setiono Setiono

Abstract

The conventional development system which is still commonly used in Indonesia is regarded as being ineffective to apply because it is more expensive. In addition to technology advancements, a development method that employs a modular approach is possible to cut down on project expenses and duration. The building process in a modular system result in industrialization, where the construction materials needed are mass-produced. This study compares the time and costs involved in building conventional and modular walls. The costs and times for traditional and modular wall works are being compared in this study using a comparative descriptive methodology. The data was gathered as part of the FPEB Building project at the Indonesian Education University (UPI), and Microsoft Excel will be used to process it. In this study, the usage of lightweight concrete panels as modular wall materials was analyzed for cost and duration effectiveness to establish the percentage of savings. From the data analysis, it was found that the use of lightweight concrete panels walls experienced a cost inefficiency of 6,4%. When viewed from a time perspective, the use of lightweight concrete panels are 45.45% efficient.

References

Adinda, N. R. 2014. Aplikasi Teknologi Pabrikasi Rumah modular pada konstruksi Rumah Tinggal. Program Studi Teknik Sipil STT Mandala: Bandung, 7(1), 15–18.

Atsaruddin, A. T. 2015. Perbandingan Rencana Anggaran Biaya Rumah M-Panel dengan Rumah Konvensional Proyek Pembangunan Rumah Tipe 60/99 Pondok Permata Suci Gresik. Program Studi Teknik Sipil Universitas Brawijaya: Malang.

Fanisa, D., Agus, E., & Binar, T. (2017). Penerapan Konsep Modular dalam Perancangan Rumah Susun Berdasarkan Right Conservation Method Kasus: Rusunami Cibangkong, Bandung.

Generalova, E. M., Generalov, V. P., & Kuznetsova A. A. 2016. Modular Buildings in Modern Construction. Procedia engineering, 153. https://doi.org/10.1016/j.proeng.2016.08.098

Hesler, Nilson. 1990. Modular Design-Where It Fits, Chemical Engineering Process, October, pp. 120-124.

Hidayat, F. & Irvan, G. 2018. Analisa Perbandingan Biaya, Waktu, Material, dan Tata Laksana Pekerjaan Dinding Menggunakan Bata Ringan, Sandwich Panel dan Beton Precast pada Proyek Pembangunan Rumah Sakit "STC" di Kota Jakarta. Program Studi Teknik Sipil Universitas Katolik Parahyangan: Bandung, 7(2), 46-50.

Khakim dkk. 2011. Studi Pemilihan Pengerjaan Beton Antara Pracetak dan Konvensional pada Pelaksanaan Konstruksi Gedung dengan Metode AHP. Program Studi Teknik Sipil Universitas Brawijaya: Malang, 5(2), 96–97.

Kristiana, R. & Pujiandi, A. 2016. Analisa Produktivitas Dinding Bata Ringan dan Dinding Precast pada Bangunan Gedung Tinggi Hunian. Pasca Sarjana Teknik sipil Universitas Mercu Buana: Jakarta, 5(2, 89–92.

Pradana, E. C. & Rosyad, F. 2021. Perbandingan Pelaksanaan Dinding Precast dengan Dinding konvensional Ditinjau dari Segi Waktu, Biaya, dan Kualitas : 896-903

Pulungan, S. 2018. Analisis Perbandingan Metode Dinding Precast dengan Metode Dinding Konvensional Ditinjau dari Segi Biaya dan Waktu pada Proyek Podomoro City Deli Medan. Tugas Akhir, Universitas Muhammadiyah Sumatera Utara, 2018 Diakses dari http://repository.umsu.ac.id/handle/123456789/8619

Rohman, M. A., Wibowo M. A. & Nuroji. 2021. Kajian Perbandingan Pengaruh Penggunaan Dinding Precast dengan Dinding Konvensional pada Proyek Cordova Semarang. Program Studi Magister Teknik Sipil Universitas Diponegoro: Semarang, 26(1), 7-9.

Setiawan, B., Indrajit, R. E. & Dazki, E. 2022. Bangunan modular Low-Rise Untuk Rumah tinggal di Kawasan Kabupaten Tangerang. Program Studi Magister Teknik Informatika Universitas Pradita: Tangerang, 11(2), 148–149.

Taofik, A. & Astuti S. 2018. Pembangunan dengan Sistem Industri Modular dan Sistem Konvensional, 77-79. Diakses 18 Maret 2023 dari Unika Soegijapranata Semarang.

Tatum, C. B. 1987. Improving Constructibility During Conceptual Planning, Journal of Construction Engineering and Management. vol.113, No.2 June, pp.191-207.
Winter, Nilson. 1979. Design of Concrete Structure, Tokyo.

DOI: https://doi.org/10.20961/mateksi.v12i2.77625

Refbacks

  • There are currently no refbacks.