DESIGN OF MOTORCYCLE FRICTION PLATE COUPLING USING BORLAND DELPHI

Dhitya Ovim Barkley Perdana, Nyenyep Sri Wardani, Husin Bugis

Abstract

Information/ computer technology is currently experiencing rapid development. Jobs without using a computer will be difficult and require considerable time to complete. The use of information technology / computers increase productivity because various activities can be carried out quickly, and accurately. One of jobs that is quite difficult and takes a long time is designing of motorcycle friction plate clutch. The program was made by translating the plate coupling design procedure into the Delphi programming language. A design program was made by arranging interfaces according to clutch design requirements then giving orders (codes). Deviation or difference in results after cross-checking between manual calculations and program calculation is 0%. The friction plate clutch design program made by Borland Delphi 7 software can work well and calculation or design using the program is more effective than manual calculation because of the shorter time needed

Keywords

Borland Delphi 7, Program, Clutch Design

Full Text:

PDF

References

L. A. Abdillah, “Perancangan Basisdata Sistem Informasi Penggajian,” Sist. Inf., 2006.

A. Ghofur et al., “Membangun Pengontrol Peralatan Keamanan Rumah Dengan Menggunakan AT89C51 Dan Borland Delphi 6,” vol. 5, no. 2, pp. 29–37, 2010.

D. Dharmawan, “Perancangan Ulang Kopling Pada Sepeda Motor GL PRO NEOTECH,” 2016.

H. Rahmnato, “Modifikasi Kopling Jenis Plat Banyak Dengan Pemberian Lubang – Lubang Pada Plat Baja Untuk Meningkatkan,” Tek. Mesin, vol. 2, no. 1, pp. 27–33, 2014.

Ir.Martina, Inge. (2004). 36 Jam Belajar Komputer Pemrograman Visual Borland Delphi 7. Jakarta: Elex Media Komputindo.

P. F. Mccombie and J. Penman, “The production of interactive engineering design software using Borland Delphi,” vol. 32, pp. 789–796, 2001.

M. Acacio, O. Cánovas, and J. M. Garc, “MPI – Delphi : an MPI implementation for visual programming environments and heterogeneous computing,” vol. 18, pp. 317–333, 2002.

Pramana, Edy. (2007). Pembangunan Aplikasi Web Untuk Pengukuran Suhu Berbasis Internet. Skripsi Dipublikasikan. Universitas Sebelas Maret, Surakarta.

Sari, Septiana Manda. (2010). Pengkajian Fungsi Gelombang Radial dan Rapat Probilitas Atom Hidogen Secara Numerik Menggunakan Delphi 7.0. Skripsi Dipublikasikan. Universitas Sebelas Maret, Surakarta.

Wahyuningrum, Wijayanti. (2016). Perancangan Aplikasi Program Delphi untuk Menghitung Struktur Utama Rumah 2 Lantai. Skripsi Dipublikasikan. Universitas Sebelas Maret, Surakarta.

Robiyansyah, “Perancangan Mesin Pencacah Pelepah Sawit Untuk Pakan Ternak Sapi ,” Tek. Mesin, 2015.

H. Sonawan, "Perancangan Elemen Mesin,". 2009.

R. Ranjan and K. Mehta, “Innovative bolt design 1 1,2,” no. 4, pp. 134–138, 2017.

M. E. Leader, “Understanding Journal Bearings,” Teknik Mesin., 2016.

V. Dobrovolsky, dkk. (1985). Machine Elements. Rusia: Peace Publisher.

Awaluddin, Rinaldy. (2003). Aplikasi Akuntansi Menggunakan Borland Delphi 7.0. Jakarta: Salemba Infotek.

DOI: https://doi.org/10.20961/jomeve.v2i2.37862

Refbacks

  • There are currently no refbacks.