Effect of CaCO3 Particles Size and Content on Impact Strenght of Kenaf/CaCO3/Epoxy Resin Hybrid Composites

Harini Sosiati, Cahyo Trisedyo Utomo, Iwan Setiono, Cahyo Budiyantoro

Abstract

Thermoplastic and thermoset polymer composites reinforced with kenaf fiber or CaCO3 have been extensively investigated. However, the study on the combination of kenaf fiber and CaCO3 reinforced epoxy resin is rare. This research discussed the effect of CaCO3 particle size and the ratio of kenaf to CaCO3 content on the impact strength of alkali-treated kenaf/ CaCO3/epoxy resin hybrid composites. Thirty % of the hybrid kenaf fibers and CaCO3 particles reinforced epoxy resin composites were fabricated by hand lay-up technique followed by cold press. Impact test of the composite specimens was conducted using a Charpy Impact test according to ASTM D 6110. The morphology of impact fracture surface was examined by scanning electron microscopy (SEM). The results showed that the impact strength of the hybrid composite increased with the decrease of CaCO3 particle size, and increasing the ratio of kenaf to CaCO3. Interfacial bonding between the reinforcement (kenaf and CaCO3) and epoxy resin matrix, the uniform dispersion of kenaf and CaCO3 within the epoxy resin matrix are two crucial factors influencing the impact strength of the composite.

Keywords

Kenaf fiber; CaCO3; epoxy resin; hybrid composite; impact strength

Full Text:

PDF

References

González, M. G., Cabanelas, J. C., & Baselga, J. 2012. Applications of FTIR on Epoxy Resins - Identification, Monitoring the Curing Process, Phase Separation and Water Uptake. Infrared Spectrosc. - Mater. Sci. Eng. Technol., Vol. 2, 261.

Abu Bakar, M. A., Ahmad, S., & Kuntjoro, W. 2010. The mechanical properties of treated and untreated kenaf fibre reinforced epoxy composite. J. Biobased Mater. Bioenergy, Vol. 4, No. 2, 159.

Singh, J. S. K., Ching, Y. C., Liu, D. S., Ching, K. Y., Razali, S., & Gan, S. N. 2018. Effects of PTFE micro-particles on the fiber-matrix interface of polyoxymethylene/glass fiber/polytetrafluoroethylene composites. Materials (Basel)., Vol. 11, No. 11, 1.

Fauzi, F. A., Ghazalli, Z., & Siregar, J. P. 2016. Effect of various kenaf fiber content on the mechanical properties of composites. J. Mech. Eng. Sci., Vol. 10, No. 3, 2226.

Budiyantoro, C., Sosiati, H., Kamiel, B. P., & Fikri, M. L. S. 2018. The effect of CaCO3 filler component on mechanical properties of polypropylene. IOP Conf. Ser. Mater. Sci. Eng., Vol. 432, 1.

Nwoye, C. I., Obelle, M. C., Nawkpa, S. O., Oniya, C. W., Obuekwe, I., & Idenyi, N. E. 2015. Predictability of the Impact Strength of CaCO3 -Epoxy Resin Composite Based on CaCO3 Input Concentration and Sustained Stress at Impact, International Journal of Materials Lifetime, Vol. 2, No. 1, 6.

Shi, J., Shi, S. Q., Barnes, H. M., Horstemeyer, M. F., & Wang, G. 2011. Kenaf bast fibers - Part II: Inorganic nanoparticle impregnation for polymer composites. Int. J. Polym. Sci., Vol. 2011, 1.

Patel, V. K., & Dhanola, A. 2016. Influence of CaCO3, Al2O3, and TiO2 microfillers on physico-mechanical properties of Luffa cylindrica/polyester composites. Eng. Sci. Technol. an Int. J., Vol. 19, 676.

Sosiati, H., Nahyudin, A., Wijayanti, D. A., Triyana, K., & Sudarisman. 2018. Effect of alkali treatment and MAPP addition on tensile strength of sisal/polypropylene composites. J. Adv. Manuf. Technol., Vol. 12, No. 2, 65.

Sosiati, H., Shofie, Y. A., & Nugroho, A. W. 2018. Tensile properties of Kenaf/E-glass reinforced hybrid polypropylene (PP) composites with different fiber loading. Evergreen,Vol. 5, No. 2, 1.

Yang, G., Heo, Y. J., & Park, S. J. 2019. Effect of morphology of calcium carbonate on toughness behavior and thermal stability of epoxy-based composites. Processes Vol. 7, 178.

Li, L., Zou, H., Shao, L., Wang, G., & Chen, J. 2005. Study on mechanical property of epoxy composite filled with nano-sized calcium carbonate particles. J. Mater. Sci., Vol. 40, 1297.

Mohan, T. P., & Kanny, K. 2018. Thermal, mechanical and physical properties of nanoegg shell particle-filled epoxy nanocomposites. J. Compos. Mater., Vol. 52, 3989.

Refbacks

  • There are currently no refbacks.