Tenebrio molitor Larvae Feeding Strategy to Degrade Polypropylene Components from Disposable Masks

Khadijah Sayyidatun Nisa, Reynaldi Ivan Prasetya, Ibnu Maulana Hidayatullah, Abdussalam Topandi, Fatimah Azizah Riyadi, Firah Gustianda Ayu, Frederick Soetandar, Dimas Rafi Narawangsa

Abstract

The surge in mask consumption during the COVID-19 pandemic led to the widespread use of disposable polypropylene masks for protection. However, the accumulation of used masks poses environmental challenges due to the slow degradation of polypropylene. Here, we investigate the potential of Tenebrio molitor larvae in degrading polypropylene masks, exploiting their synthetic polymer-breaking enzymes and associated microflora. In this study, we implemented various feeding strategies and established specific feed compositions to assess T. molitor larvae's consumption behavior towards polypropylene masks. Over a 21-day observation period, we noted a consumption rate of 0.4% of masks, with a 7.5% mortality rate among the larvae. The average daily consumption rate was 0.201 grams, resulting in a 2.3% increase in larval weight and the production of 0.4635 grams of feces. Our findings highlight the potential of T. molitor larvae as effective mask degraders. Optimizing cultivation conditions and feeding strategies may further enhance microbial diversity, potentially introducing more polypropylene degraders within T. molitor, thereby expediting mask degradation. This study emphasizes the promising role of T. molitor larvae in addressing the environmental challenges posed by the accumulation of polypropylene masks.

Keywords: 

Mask, Degrade, Tenebrio molitor, Microflora, Polypropylene

Full Text:

PDF

References

[1] G. A. Idowu, A. O. Olalemi, and A. F. Aiyesanmi, “Environmental impacts of covid-19 pandemic: Release of microplastics, organic contaminants and trace metals from face masks under ambient environmental conditions,” Environ Res, vol. 217, p. 114956, Jan. 2023, doi: 10.1016/j.envres.2022.114956.

[2] N. B. Douti, E. E. Y. Amuah, E. Acheampong, P. Dankwa, R. W. Kazapoe, and E. P. Agyemang, “Management of face masks driven by the COVID-19 pandemic, possible implications and proposed policies: A household perspective,” World Development Sustainability, vol. 3, p. 100093, Dec. 2023, doi: 10.1016/j.wds.2023.100093.

[3] P. Rajeev, A. Ramesh, S. Navaratnam, and J. Sanjayan, “Using Fibre recovered from face mask waste to improve printability in 3D concrete printing,” Cem Concr Compos, vol. 139, p. 105047, May 2023, doi: 10.1016/j.cemconcomp.2023.105047.

[4] A. Hosseinzadeh, R. Hayati, N. Alinejad, and A. Badeenezhad, “Main challenges caused by the epidemic on hospital waste management and their control methods: A case study based on the experience of the Covid-19 pandemic,” Case Studies in Chemical and Environmental Engineering, vol. 8, p. 100441, Dec. 2023, doi: 10.1016/j.cscee.2023.100441.

[5] T. A. Aragaw, “Surgical face masks as a potential source for microplastic pollution in the COVID-19 scenario,” Mar Pollut Bull, vol. 159, p. 111517, Oct. 2020, doi: 10.1016/j.marpolbul.2020.111517.

[6] Y. Li et al., “Life-cycle assessment reveals disposable surgical masks in 2020–2022 led to more than 18 million tons of carbon emissions,” One Earth, vol. 6, no. 9, pp. 1258–1268, Sep. 2023, doi: 10.1016/j.oneear.2023.08.008., vol. 197, pp. 1–33, Nov. 2014, doi: 10.1016/j.anifeedsci.2014.07.008.

[7] A. Alsabri, F. Tahir, and S. G. Al-Ghamdi, “Environmental impacts of polypropylene (PP) production and prospects of its recycling in the GCC region,” Mater Today Proc, vol. 56, pp. 2245–2251, 2022, doi: 10.1016/j.matpr.2021.11.574.

[8] S.-S. Yang et al., “Biodegradation of polypropylene by yellow mealworms (Tenebrio molitor) and superworms (Zophobas atratus) via gut-microbe-dependent depolymerization,” Science of The Total Environment, vol. 756, p. 144087, Feb. 2021, doi: 10.1016/j.scitotenv.2020.144087.

[9] S. W. Przemieniecki, A. Kosewska, S. Ciesielski, and O. Kosewska, “Changes in the gut microbiome and enzymatic profile of Tenebrio molitor larvae biodegrading cellulose, polyethylene and polystyrene waste,” Environmental Pollution, vol. 256, p. 113265, Jan. 2020, doi: 10.1016/j.envpol.2019.113265.

[10] P. Karthikeyan, M. Subagunasekar, N. Lenin, and K. Prabhu, “Abundance, spatial distribution, and chemical characterization of face masks on the beaches of SE Kanyakumari, India,” Mar Pollut Bull, vol. 192, p. 115031, Jul. 2023, doi: 10.1016/j.marpolbul.2023.115031.

DOI: https://doi.org/10.20961/equilibrium.v8i1.84381

Refbacks

  • There are currently no refbacks.