STUDI EKSPERIMENTAL PENGARUH JUMLAH SUDU DAN PENGGUNAAN END PLATE TERHADAP CUT IN SPEED TURBIN ANGIN SAVONIUS HELIKS

Hermawan Yudha Prasetya, Danar Susilo Wijayanto, Taufik Wisnu Saputra

Abstract

This study aims to analyze the effect of variations in the number of blades and the use of end plates on the cut in speed of Helical Savonius wind turbine. The method used in this research is the experimental method. The variables used in this study are variations in wind speed from 1 to 5 m/s with intervals of 0.5 m/s. Variations in the number of blades are 2,3, and 4 blades. Variations in the use of end plates and without end plates. The results of this study was found that variations in the number of blades and the use of end plates affect the cut in speed of helical Savonius wind turbine. The fewer the number of turbine blades, the better the turbine's cut in speed will be. 2 blade’s Helical Savonius wind turbine with end plate is turbine variation that is able to produce best cut in speed of 1.97 m/s, compared to other variations.

Keywords

cut in speed, blade, end plate, helical savonius wind turbine

Full Text:

PDF

References

Abdelaziz, K. R., Nawar, M. A. A., Ramadan, A., Attai, Y. A., & Mohamed, M. H. (2022). Performance Improvement of a Savonius Turbine by Using Auxiliary Blades. Energy, 244, 122575. https://doi.org/10.1016/J.ENERGY.2021.122575 Alit, I. B., Nurchayati, N., & Pamuji, S. H. (2016). Turbin Angin Poros Vertikal Tipe Savonius Bertingkat dengan Variasi Posisi Sudut. Dinamika Teknik Mesin, 6(2), 107–112. https://doi.org/10.29303/d.v6i2.13 Azhar, M., & Satriawan, D. A. (2018). Implementasi Kebijakan Energi Baru dan Energi Terbarukan Dalam Rangka Ketahanan Energi Nasional. 1(November), 398–412. Badan Pengkajian dan Penerapan Teknologi (BPPT). (2021). OutLook Energi Indonesia 2021. Jakarta : Badan Pengkajian dan Penerapan Teknologi (BPPT). Cendrawati, D. G., Soekarno, H., & Nasution, S. (2015). Potensi Energi Angin di Kabupaten Serdang Bedagai, Provinsi Sumatera Utara. Ketenagalistrikan Dan Energi Terbarukan, 14(1), 15–28. Ibadi, H., Sangidzun, A., Wijayanto, D. S., Saputro, H., Soenarto, & Triyono, M. B. (2021). Effect of Adding of Pitch on the Darrieus Blade against the Cut in Speed of the Savonius Type S - Darrieus Type H Hybrid Turbine. IOP Conference Series: Earth and Environmental Science, 1808(1). https://doi.org/10.1088/1742-6596/1808/1/012003 Ismail, Y., & Saleh, C. (2015). Tenaga Listrik Sumbu Vertikal Savonius Portabel. Rancang Bangun Kincir Angin, 5(September), 19–24. Kamal, F. M., Centre, A. E., & Commission, E. (2008). Aerodynamic Characteristics of a Stationary Five Bladed. M(2). Kumar, A., & Nikhade, A. (2015). Hybrid Kinetic Turbine Rotors: a Review. International Journal of Engineering Science & Advanced Technology, 4(6), 453–463. http://www.ijesat.org Mahmoud, N. H., El-Haroun, A. A., Wahba, E., & Nasef, M. H. (2012). An Experimental Study on Improvement of Savonius Rotor Performance. Alexandria Engineering Journal, 51(1), 19–25. https://doi.org/10.1016/j.aej.2012.07.003 Micha Premkumar, T., Sivamani, S., Kirthees, E., Hariram, V., & Mohan, T. (2018). Data Set on the Experimental Investigations of a Helical Savonius Style VAWT with and without EndPplates. Data in Brief, 19, 1925–1932. https://doi.org/10.1016/j.dib.2018.06.113 Pamungkas, S. F., Wijayanto, D. S., & Saputro, H. (2017). Pengaruh Variasi Penambahan Fin terhadap Cut in speed Turbin Angin Savonius tipe S. Journal of Mechanical Engineering Education, 2(1), 169–178. http://www.iieta.org/download/file/fid/8657 Prabowo, D., Wijayanto, D. S., & Widiastuti, I. (2017). Pengaruh Penambahan Fin pada Sudu terhadap cut in speed Turbin Angin Savonius tipe L. Jurnal Mekanika Dan Sistem Termal (JMST), 2(April), 10–14. Siregar, A. M. (2016). Design and Manufacture of Prototypes Dua Tipe Rotor Turbin Angin Sumbu Vertikal sebagai Objek Penelitian Studi Eksperimental. Jurnal Teknovasi, 04(02),1–14. http://www.poolspanews.com/how-to/maintenance/what-to-know-about-cyanuric-acid_o Zulfikar, Nusyriwan, & Rakiman. (2013). Kajian Eksperimental Pengaruh Jumlah Sudu Terhadap Torsi dan Putaran Turbin Savonius type U. Jurnal Rekayasa Mesin, 4(2), 93–100.

DOI: https://doi.org/10.20961/nozel.v4i2.72230

Refbacks

  • There are currently no refbacks.