DC-DC Converters For Hydrogen Fuel Cell Control: A Comprehensive Literature Review

Mohd Shafie Bakar, Mohd Shawal Jadin, Mohd Herwan Sulaiman, Nugroho Agung Pambudi, Danar Susilo Wijayanto

Abstract

This paper presents a comprehensive literature review of recent advances in DC–DC converter technologies for hydrogen fuel cell power conditioning, with particular emphasis on proton exchange membrane fuel cells (PEMFCs) used in electric vehicle and stationary energy systems. Covering 29 peer-reviewed studies, the review examines progress in converter topologies, control methodologies, and performance optimization. The analysis highlights interleaved boost converters combined with advanced control strategies—such as linear quadratic regulator (LQR) control, fractional-order PID control, and sliding mode control—as the current state-of-the-art, achieving efficiencies above 95% while substantially reducing input current ripple and improving transient response. Emerging research trends include high-gain impedance-network converters enabling wide input voltage ranges, isolated and bidirectional converter architectures that support hybrid energy storage integration, and intelligent optimization-based control approaches incorporating particle swarm optimization (PSO) and model predictive control (MPC). The review further identifies key trade-offs in efficiency, power density, voltage gain capability, and dynamic behavior across converter designs, providing a structured foundation for future development of high-performance fuel cell power conditioning systems.

Keywords

hydrogen fuel cell, PEMFC, DC–DC converter, power conditioning

Full Text:

PDF

References

Afkar, S., Gavagsaz-Ghoachani, R., Phattanasak, M., Martin, J. P., Nahid-Mobarakeh, B., & Pierfederici, S. (2022). Generalization of a DC–DC modular converter topology for fuel cell applications. IEEE Transactions on Industry Applications, 58(2), 2247–2256. https://doi.org/10.1109/TIA.2022.3142659 Ahmed, M., Hardiansyah, Abdelrahman, M. S., & Suzuki, Y. (2018). Modelling and passivity-based control of a non-isolated DC-DC converter in a fuel cell system. International Journal of Electrical and Computer Engineering, 8(5), 3436–3443. https://doi.org/10.11591/IJECE.V8I5.PP3436-3443 Ahmed, M., Hardiansyah, Abdelrahman, M. S., Suzuki, Y., & Hatanaka, K. (2009). High-efficiency DC-DC converter for fuel cell applications: Performance and dynamic modeling. In Proceedings of the IEEE Energy Conversion Congress and Exposition. https://doi.org/10.1109/ECCE.2009.5316119 Andrade, A. M. S. S., Faistel, T., Guisso, R. A., & Toebe, A. (2022). Comparative study of single-switch and double-switch converter topologies, working on dead-zone mode, for fuel cell applications. In Proceedings of the IEEE International Conference on SMART. https://doi.org/10.1109/SMART55236.2022.9990356 Andreičiks, A., & Ribickis, L. (2010). Current-fed step-up DC/DC converter for fuel cell applications with active overvoltage clamping. Scientific Journal of Riga Technical University: Power and Electrical Engineering, 27, 21–26. https://doi.org/10.2478/V10144-010-0032-0 Bayendang, N. P., Kahn, M. T., & Balyan, V. (2021). Power converters and EMS for fuel cells CCHP applications: A structural and extended review. Advances in Science, Technology and Engineering Systems Journal, 6(3), 64–79. https://doi.org/10.25046/AJ060308 Demir, M. A., Kılıç, F., & Kaya, İ. (2023). Designs of particle-swarm-optimization-based intelligent PID controllers and DC/DC buck converters for PEM fuel-cell-powered four-wheeled automated guided vehicle. Applied Sciences, 13(5), 2919. https://doi.org/10.3390/app13052919 Dinakaran, S., Dash, S. S., Natarajan, S., & Chinnamuthu, S. (2023). Hybrid quadratic DC-DC boost converter for fuel cell-powered electric vehicle with wide voltage gain and low voltage stress. International Journal of Power Electronics and Drive Systems, 14(4), 2230–2239. https://doi.org/10.11591/ijpeds.v14.i4.pp2230-2239 Habib, M., Khoucha, F., & Harrag, A. (2015). An improved LQR-based controller for PEMFC interleaved DC-DC converter. Balkan Journal of Electrical and Computer Engineering. https://doi.org/10.17694/BAJECE.46410 Hegazy, O., Van Mierlo, J., & Lataire, P. (2011). Analysis, control and comparison of DC/DC boost converter topologies for fuel cell hybrid electric vehicle applications. In Proceedings of the European Conference on Power Electronics and Applications. Hegazy, O., Van Mierlo, J., & Lataire, P. (2012). Analysis, modeling, and implementation of a multidevice interleaved DC/DC converter for fuel cell hybrid electric vehicles. IEEE Transactions on Power Electronics, 27(11), 4445–4458. https://doi.org/10.1109/TPEL.2012.2183148 Jang, Y., Jovanovic, M. M., Dillman, D. L., & Hahn, J. K. (2019). Isolated, bi-directional DC-DC converter for fuel cell electric vehicle applications. In Proceedings of the IEEE Applied Power Electronics Conference. https://doi.org/10.1109/APEC.2019.8722067 Kanaan, H. Y., Al-Haddad, K., Chédid, R., & Mougharbel, I. (2009). Modeling, control and simulation of a high-current DC-DC converter for fuel cell applications. Renewable Energy & Power Quality Journal, (7), 232–237. https://doi.org/10.24084/REPQJ07.232 Koundi, M., El Fadil, H., Belhaj, F. Z., Lassioui, A., El Idrissi, Z., Nady, S., & Bouanou, T. (2022). State-feedback control of interleaved buck–boost DC–DC power converter with continuous input current for fuel cell energy sources: Theoretical design and experimental validation. World Electric Vehicle Journal, 13(7), 124. https://doi.org/10.3390/wevj13070124 Kovacevic, G., Tenconi, A., & Bojoi, R. (2008). Advanced DC–DC converter for power conditioning in hydrogen fuel cell systems. International Journal of Hydrogen Energy, 33(12), 3215–3219. https://doi.org/10.1016/J.IJHYDENE.2008.03.058 Liu, Y., Zhang, Q., Wang, C., & Wang, Y. (2023). Control method of hydrogen fuel cell DC-DC converter based on generalized second-order differential. In Proceedings of the International Conference on Power Energy Technology. https://doi.org/10.1109/icpet59380.2023.10367504 Ma, R., Xu, L., Xie, R., Zhao, D., & Huangfu, Y. (2019). Advanced robustness control of DC–DC converter for proton exchange membrane fuel cell applications. IEEE Transactions on Industry Applications, 55(6), 6389–6400. https://doi.org/10.1109/TIA.2019.2935981 Madhavi, B. J., & Fernandes, B. G. (2019). Variable structure control for an isolated boost converter used in fuel cell applications. International Journal of Electrical and Computer Engineering, 9(6), 4493–4506. https://doi.org/10.11591/IJECE.V9I6.PP4493-4506 Mohamed, Y. A. R. I. (2013). Hybrid power system intelligent operation and protection involving distributed architectures and pulsed loads [Doctoral dissertation, Florida International University]. https://doi.org/10.25148/ETD.FI13042301 Mohamed, Y. A. R. I., Zeineldin, H. H., Salama, M. M. A., & Seethapathy, R. (2011). High-quality integration of fuel cells energy into electric grids. In Proceedings of the IEEE International Symposium on Industrial Electronics. https://doi.org/10.1109/ISRCS.2011.6016095 Qi, L., Jiaqiang, E., Zhang, B., Huang, G., Luo, B., & Tan, Y. (2020). Fractional controller design of a DC-DC converter for PEMFC. IEEE Access, 8, 120134–120144. https://doi.org/10.1109/ACCESS.2020.3005439 Qian, H. (2010). Modeling and design of multi-port DC/DC converters [Doctoral dissertation, Virginia Polytechnic Institute and State University]. Sakka, M. A., Van Mierlo, J., & Gualous, H. (2009). Comparison of 30KW DC/DC converter topologies interfaces for fuel cell in hybrid electric vehicle. In Proceedings of the European Conference on Power Electronics and Applications. Wang, Y., Li, W., Wu, X., Wu, X., & Li, X. (2024). Theoretical comparison, real-time emulation, and experiment validation of DC/DC converter for fuel cell electric vehicle. IEEE Access, 12, 52686–52697. https://doi.org/10.1109/access.2024.3390196 Wu, Y., Hu, K., Sun, X., Cheng, S., & Liu, Y. (2021). Review of DC-DC converter topologies based on impedance network with wide input voltage range and high gain for fuel cell vehicles. Chinese Journal of Mechanical Engineering, 34, 119. https://doi.org/10.1007/S42154-021-00163-Z Wu, Y., Mahmoud, Y., Zhao, J., Liu, Y., & Cheng, S. (2020). A novel high-gain DC-DC converter applied in fuel cell vehicles. IEEE Transactions on Vehicular Technology, 69(11), 12763–12774. https://doi.org/10.1109/TVT.2020.3023545 Xu, H., Kong, L., & Wen, X. (2004). Fuel cell power system and high power DC-DC converter. IEEE Transactions on Power Electronics, 19(5), 1250–1255. https://doi.org/10.1109/TPEL.2004.833440 Zhang, L., Yuan, Y., Sun, Y., Cheng, Y., Wu, D. Ren, L. (2022). Research on the Intelligent Control Strategy of the Fuel Cell Phase-Shifting Full-Bridge Power Electronics DC-DC Converter. Energy Engineering, 119(1), 387–405. https://doi.org/10.32604/EE.2022.017463 Zhou, D., Qiu, Y., Xie, M., Yang, Y., & Blaabjerg, F. (2023). Topology and control of fuel cell generation converters. Energies, 16(11), 4525. https://doi.org/10.3390/en16114525

DOI: https://doi.org/10.20961/nozel.v8i4.123020

Refbacks

  • There are currently no refbacks.