Evaluasi Ekonomi Teknik Predictive Maintenance di Industri Manufaktur: Systematic Literature Review

Zus tian

Abstract

This study aims to evaluate the economic engineering aspects of predictive maintenance implementation in the manufacturing industry using a systematic literature review (SLR) approach. Literature searches were conducted through five databases, namely Google Scholar, ScienceDirect, IEEE Xplore, SpringerLink, and Emerald, using keywords related to predictive maintenance, manufacturing industry, engineering economy, cost-benefit analysis, return on investment, payback period, and life cycle cost. The article selection process followed the PRISMA 2020 framework and resulted in 25 final articles from 250 articles identified in the initial search. The findings show that predictive maintenance in manufacturing is commonly implemented through machine learning, IoT sensor monitoring, vibration analysis, digital twin, and condition-based monitoring. From an economic engineering perspective, these implementations contribute to downtime reduction, lower emergency maintenance costs, improved asset reliability, and better investment efficiency. However, most studies remain dominated by technical performance evaluation, while comprehensive economic indicators such as ROI, NPV, IRR, payback period, life cycle cost, and cost-benefit analysis are still limited. This study highlights the need to integrate technical performance and economic feasibility analysis in predictive maintenance decision-making.

Keywords

predictive maintenance, engineering economy, manufacturing industry, systematic literature review, cost-benefit analysis

Full Text:

PDF

References

Abidi, Mustufa Haider, Muneer Khan Mohammed, and Hisham Alkhalefah. 2022. “Predictive Maintenance Planning for Industry 4 . 0 Using Machine Learning for Sustainable Manufacturing.” 14(6):1–27. Achouch, Mounia, Mariya Dimitrova, Khaled Ziane, Sasan Sattarpanah Karganroudi, Rizck Dhouib, Hussein Ibrahim, and Mehdi Adda. 2022. “On Predictive Maintenance in Industry 4.0: Overview, Models, and Challenges.” 12(16):1–22. Ali, Muhammad Intizar. 2021. “Scholar Commons Cognitive Digital Twins for Smart Manufacturing Cognitive Digital Twins for Smart Manufacturing.” 1–8. Belim, Marco, Tiago Meireles, Gil Gonçalves, and Rui Pinto. 2024. “Forecasting Models Analysis for Predictive Maintenance.” (September):1–21. doi: 10.3389/fmtec.2024.1475078. Buccaro, Marta, Armando Toscano, Melissa Balzarotti, Ilaria Re, Diego Bosco, and Maurizio Bettiga. 2023. “Techno-Economic Assessment of APS-Based Poultry Feed Production with a Circular Biorefinery Process.” 15(3):1–17. Calabrese, Matteo, Martin Cimmino, Francesca Fiume, Martina Manfrin, Luca Romeo, Silvia Ceccacci, Marina Paolanti, Giuseppe Toscano, Giovanni Ciandrini, Alberto Carrotta, Maura Mengoni, and Emanuele Frontoni. n.d. “SOPHIA : An Event-Based IoT and Machine Learning Architecture for Predictive Maintenance in Industry 4 . 0.” 11(4):1–17. doi: 10.3390/info11040202. Çınar, Zeki Murat, Abubakar Abdussalam Nuhu, Qasim Zeeshan, and Orhan Korhan. 2020. “Machine Learning in Predictive Maintenance towards Sustainable Smart Manufacturing in Industry 4 . 0.” 12(19):1–42. Dolatabadi, Sepideh Hassankhani, and Ivana Budinska. 2021. “For SMEs from the Last Decade.” 9(9):1–15. Elkateb, Sherien, M. Ahmed, Abdelrahman Shendy, and Ahmed E. B. Abu-elanien. 2024. “Machine Learning and IoT – Based Predictive Maintenance Approach for Industrial Applications.” 88(October 2023):1–12. doi: 10.1016/j.aej.2023.12.065. Enzberg, Sebastian Von, Athanasios Naskos, Ifigeneia Metaxa, and Daniel Köchling. 2020. “Implementation and Transfer of Predictive Analytics for Smart Maintenance : A Case Study.” 2(November):1–13. doi: 10.3389/fcomp.2020.578469. Ghasemkhani, Bita, and Ozlem Aktas. 2023. “Balanced K-Star : An Explainable Machine Learning Method for Internet-of-Things-Enabled Predictive Maintenance in Manufacturing.” 11(3):1–20. Hassan, Muhammad, Marcus Svadling, and Niclas Björsell. 2023. “Experience from Implementing Digital Twins for Maintenance in Industrial Processes.” Journal of Intelligent Manufacturing 35:1–10. doi: 10.1007/s10845-023-02078-4. Liu, Changchun, Dunbing Tang, Haihua Zhu, and Qingwei Nie. 2021. “A Novel Predictive Maintenance Method Based on Deep Adversarial Learning in the Intelligent Manufacturing System.” 9:1–19. Lowe, Matthew, and Ruwen Qin. 2022. “A Review on Machine Learning , Artificial Intelligence , and Smart Technology in Water Treatment and Monitoring.” 14(9):1–28. Luis, Marcelo, Ruiz Rodríguez, Sylvain Kubler, Andrea De Giorgio, Maxime Cordy, Jérémy Robert, and Yves Le. 2022. “Robotics and Computer-Integrated Manufacturing Multi-Agent Deep Reinforcement Learning Based Predictive Maintenance on Parallel Machines.” 78(June):1–12. Martin, Jon, Fordal Per, Schjølberg Hallvard, Helgetun Tor, and Øistein Skjermo. 2023. “Application of Sensor Data Based Predictive Maintenance and Artificial Neural Networks to Enable Industry 4 . 0.” Advances in Manufacturing 11(2):1–16. doi: 10.1007/s40436-022-00433-x. Meddaoui, Anwar. 2023. “The Benefits of Predictive Maintenance in Manufacturing Excellence : A Case Study to Establish Reliable Methods for Predicting Failures .” 1–9. Mol, Marek, Weiping Ding, and Vaidy Sunderam. 2023. “From Corrective to Predictive Maintenance — A Review of Maintenance Approaches for the Power Industry.” 23(13):1–47. Mourtzis, Dimitris, John Angelopoulos, and Nikos Panopoulos. 2020. “Intelligent Predictive Maintenance and Remote Monitoring Framework for Industrial Equipment Based on Mixed Reality.” 6(December):1–12. doi: 10.3389/fmech.2020.578379. Nacchia, Milena, Fabio Fruggiero, Alfredo Lambiase, and Ken Bruton. 2021. “Applied Sciences A Systematic Mapping of the Advancing Use of Machine Learning Techniques for Predictive Maintenance in the Manufacturing Sector.” 11(6):1–34. Nagy, Marek, Marcel Figura, and Katarina Valaskova. 2025. “Predictive Maintenance Algorithms , Artificial Intelligence Digital Twin Technologies , and Internet of Robotic Things in Big Data-Driven Industry 4 . 0 Manufacturing Systems.” 13(6):1–28. Omar, Ammar, and Serkan Ayvaz. 2022. “Remaining Useful Lifetime Prediction for Predictive Maintenance in Manufacturing.” 1–37. Peji, Mirjana. 2023. “Predictive Maintenance in Industry 4 . 0 for the SMEs : A Decision Support System Case Study Using Open-Source Software.” 7(4):1–23. Pulcini, Valerio, and Gianfranco Modoni. 2024. “Machine Learning-Based Digital Twin of a Conveyor Belt for Predictive Maintenance.” 133:1–16. doi: 10.1007/s00170-024-14097-3. Putnik, Goran D., Vijaya Kumar, Sai Krishna, Leonilde Varela, and Francisco Ferreira. 2021. “CIRP Annals - Manufacturing Technology Semi-Double-Loop Machine Learning Based CPS Approach for Predictive Maintenance in Manufacturing System Based on Machine Status Indications.” CIRP Annals - Manufacturing Technology 70(1):1–4. doi: 10.1016/j.cirp.2021.04.046. Rabello, Arnaldo, De Aguiar Vallim, Daniel Farina Moraes, Marco Vinicius, Bhering De Aguiar, Leilton Santos, and Leandro Augusto. 2022. “A Machine Learning Modeling Framework for Predictive Maintenance Based on Equipment Load Cycle : An Application in a Real World Case.” 15(10):1–41. Rosati, Riccardo, Luca Romeo, Gianalberto Cecchini, Flavio Tonetto, Paolo Viti, Adriano Mancini, and Emanuele Frontoni. 2023. “From Knowledge-Based to Big Data Analytic Model : A Novel IoT and Machine Learning Based Decision Support System for Predictive Maintenance in Industry 4 . 0.” Journal of Intelligent Manufacturing 34(1):1–15. doi: 10.1007/s10845-022-01960-x. Sanchez-londono, David, Giacomo Barbieri, and Luca Fumagalli. 2023. “Smart Retrofitting in Maintenance : A Systematic Literature Review.” Journal of Intelligent Manufacturing 34(1):1–19. doi: 10.1007/s10845-022-02002-2. Sang, Go Muan, Lai Xu, and Paul De Vrieze. 2021. “A Predictive Maintenance Model for Flexible Manufacturing in the Context.” 4(August):1–23. doi: 10.3389/fdata.2021.663466. Sipil, Elektro D. A. N., Riana Puspita, Yudi Daeng Polewangi, Muhammad Fazri, and Zufri Hasrudy Siregar. 2024. “LEAN SIX SIGMA APPROACH TO INCREASE PROCESS CYCLE EFFICIENCY IN PALM OIL PROCESSING AT PT . X.” 05(01):1–9. doi: 10.54123/vorteks.v5i1.357. Siregar, Hasrudy, and Capacity Requirement Planning. n.d. “ELEKTRO DAN SIPIL PENGGUNAAN METODE CAPACITY REQUIREMENT PLANNING ( CRP ) DENGAN APLIKASI POM FOR WINDOWS DALAM PERHITUNGAN KAPASITAS PRODUKSI ( STUDI KASUS INDUSTRI PENGOLAHAN TAHU XYZ ).” 01(01):1–10. Sustainment, Defence Fixed-wing Aircraft. 2022. “A Systematic Literature Review of Predictive Maintenance for Defence Fixed-Wing Aircraft Sustainment and Operations.” 22(18):1–31. Taoufyq, Hicham. 2025. “Predictive Maintenance Approaches : A Systematic Literature Review.” 18(3):1–32. Welte, Rebecca, Manfred Estler, Dominik Lucke, Paul Stief, Jean-yves Dantan, Alain Etienne, and Ali Siadat. 2019. “ScienceDirect ScienceDirect ScienceDirect A Method for Implementation of Machine Learning Solutions for Predictive 28th CIRP Design of A Method for Implementation Machine Learning for Predictive Maintenance in Small and Medium Sized Solutions Enterprises.” Procedia CIRP 93:1–6. doi: 10.1016/j.procir.2020.04.052. Yang, Yating, and Muhammad Zahid Iqbal. 2025. “Cost-Optimised Machine Learning Model Comparison for Predictive Maintenance.” 14(12):1–19.

DOI: https://doi.org/10.20961/nozel.v8i4.122817

Refbacks

  • There are currently no refbacks.